Interlux Bilgekote White Quart - Durable Oil-Based Bilge, Locker and Bulkhead Paint (5509652)

Bilgekote White is a tough, oil-based marine finish built for the hardest-working spaces on your boat. Formulated to withstand oils, chemicals, knocks and scrapes, it delivers a durable gloss coating that keeps bilges, lockers and bulkheads clean, bright and easy to maintain. The high-gloss white surface reflects light to brighten dark compartments and makes spotting leaks or debris far easier.

Chip resistant and waterproof, Bilgekote goes on as a liquid and cures to a hard, wipeable finish that stands up to years of service below deck. Two coats provide a highly durable, protective barrier that is equally effective in storage lockers and on interior bulkheads.

Specifications

• Brand: Interlux
• Manufacturer Part Number: 5509652
• Color: White (gloss)
• Finish type: Gloss
• Paint type: Oil-based
• Item form: Liquid
• Size: 1 Quart
• Coverage: approximately 10.36 square meters per liter
• Chip resistant and waterproof
• Indoor use, wood and fiberglass surfaces
• Weight: 2.9 lb
• UPC: 081948408646

Application

• Remove all oil and grease from the bilges before painting.
• Sand with 220-grit sandpaper; if the surface is in poor condition, sand with 80-grit.
• If previously painted, remove all old, flaky paint and ensure the area is completely dry.
• Clean thoroughly with an appropriate solvent wash, surface prep or thinner before coating.
• Apply two coats for a highly durable finish. Never apply direct from the can to avoid introducing contamination.
• Use top quality fine line masking tape for crisp, clean lines.

Frequently Asked Questions

What is Bilgekote White used for? Bilgekote White is a durable oil-based marine paint designed for boat bilges, lockers and bulkheads. It provides a hard, protective gloss finish that withstands oils, chemicals, knocks and scrapes.

What color and finish is this paint? This is a white paint with a gloss finish. The bright white color reflects light to brighten dark compartments and makes leaks or debris easy to spot.

How many coats should I apply? Apply two coats for the best durability. Never apply directly from the can, as this can introduce contamination into the finish.

How do I prepare the surface before painting? Remove all oil and grease first, then sand with 220-grit sandpaper. If the surface is in poor condition, sand with 80-grit. Clean thoroughly with a suitable solvent wash, surface prep or thinner, and make sure the area is completely dry.

What if the bilges have been painted before? Remove all old, flaky paint and ensure the area to be painted is completely dry before applying new coats.

Is Bilgekote waterproof? Yes. It is waterproof and chip resistant, curing to a hard, wipeable finish that stands up to the demanding conditions found in bilges and lockers.

What size is this container? This is a 1 quart can of paint.

How much area does a quart cover? Coverage is approximately 10.36 square meters per liter, depending on surface porosity and application method.

Can this paint be used on both wood and fiberglass? Yes. It is suitable for wood and fiberglass surfaces. When painting fiberglass, evaluate whether any anti-osmosis treatment is needed before coating.

Is it resistant to chemicals and oils? Yes. Bilgekote is formulated to withstand oils and chemicals as well as knocks and scrapes, making it well suited to bilges and storage lockers.

What kind of masking tape should I use? Always use top quality fine line masking tape to ensure good, crisp paint lines.

Is this paint for indoor or outdoor boat areas? It is intended for interior boat spaces such as bilges, lockers and bulkheads, all located above the waterline.