Interlux Interprotect 2002 White Epoxy Barrier Coat Primer - 1 Gallon Kit
Interlux Interprotect 2002 White Epoxy Barrier Coat Primer - 1 Gallon Kit
Interlux Interprotect 2002 is a two-component white epoxy barrier coat primer engineered to seal and protect boat hulls below the waterline. Its low-porosity film helps guard aged gelcoats against moisture and solvent entrapment, reducing the risk of osmotic blistering, and creates a sound, sealed foundation before undercoats and finish coats are applied.
Specifications
- Brand: Interlux
- Manufacturer Part Number: 5608442
- Color: White
- Type: Two-part epoxy barrier coat primer
- Size: 1 Gallon kit
- Weight: 13.2 lb
- Category: Marine primer
- Application: Brush or roller, held at 45 degrees to minimize brush marks
Application Notes
- Apply at a 45 degree angle to minimize brush marks.
- Sealing an aged, porous gelcoat with Interprotect followed by Epoxy Primekote can reduce the risk of moisture or solvent entrapment and the blisters that can result.
- On large areas, work with two people, one applying and one following immediately behind to tip off the finish.
- Stir the can occasionally during the work.
- Clean or change brushes every 20 minutes and use lint-free cleaning cloths.
- Primed or previously painted surfaces should be undercoated.
Frequently Asked Questions
What is Interprotect 2002 used for? It is a two-part white epoxy barrier coat primer used to seal and protect boat hulls, helping to reduce the risk of moisture penetration and osmotic blistering before undercoats and finish coats are applied.
What color is this primer? This is the white version of the Interprotect barrier coat primer.
How large is the kit? This is a 1 gallon kit with a shipping weight of 13.2 pounds.
How should I apply it to minimize brush marks? Apply the primer with the brush held at a 45 degree angle, which helps minimize brush marks in the film.
Can it help prevent blisters on an older hull? Yes. Because aged gelcoats are porous, moisture or solvent can become trapped and lead to blisters. Applying Interprotect followed by Epoxy Primekote can reduce this risk and seal the gelcoat before the finish is applied.
What is the best way to coat a large area? Large areas are best done by two people, one applying the paint and the other following immediately behind to tip off the finish for an even result.
How often should I clean my brushes? Clean or change brushes every 20 minutes or so during application, and always use lint-free cleaning cloths.
Do I need to stir the product during use? Yes, stir the can occasionally during the work to keep the material consistent.
Should previously painted surfaces be undercoated? Primed or previously painted surfaces should be undercoated before applying the finish.
Is this a single-part or multi-part product? It is supplied as a two-part kit that is combined before application.