Interlux Micron CF Ablative Antifouling Bottom Paint, Black, Gallon (5608694)
Interlux Micron CF Ablative Antifouling Bottom Paint, Black, Gallon (5608694)
Interlux Micron CF is an ablative antifouling bottom paint formulated to protect boat hulls from fouling growth while wearing away gradually as the boat moves through the water, reducing the need for heavy sanding between seasons. This gallon container is finished in black and is part of Interlux's ablative bottom paint line.
Micron CF is compatible with a range of existing bottom paint systems, allowing it to be applied over previous coatings of Micron Extra, Micron CSC, Fiberglass Bottomkote, Fiberglass Bottomkote ACT, Bottomkote, Bottomkote XXX, Ultra, Ultra-Kote, Tri-Lux II, and Trilux 33 without requiring a full strip-down in many cases. For bare fiberglass hulls, two application systems are supported: a no-sand system using Fiberglass No Sand Primer (or InterProtect 2000E) as the undercoat, and a traditional sanding system in which the surface is sanded with 80-grit sandpaper to a flat matte finish, wiped clean with Fiberglass Solvent Wash 202, and then coated with a minimum of two coats of the antifouling paint. Before applying Micron CF over a previously painted surface, the hull should be tested until it reaches the 'Ready-to-Overcoat' stage, at which point the antifouling paint can be applied.
Specifications
- Brand: Interlux
- Manufacturer Part Number: 5608694
- Product Line: Micron CF
- Color: Black
- Container Size: Gallon
- Category: Ablative Bottom Paint
- Weight: 14.6 pounds
- UPC: 081948001427
- Compatible Undercoats: InterProtect 2000E, Fiberglass No Sand Primer
- Compatible Existing Bottom Paints: Micron Extra, Micron CSC, Fiberglass Bottomkote, Fiberglass Bottomkote ACT, Bottomkote, Bottomkote XXX, Ultra, Ultra-Kote, Tri-Lux II, Trilux 33
Frequently Asked Questions
What type of bottom paint is Interlux Micron CF? Micron CF is an ablative antifouling bottom paint from Interlux, sold here in a black, gallon-size container under part number 5608694.
How many coats of Micron CF should be applied to bare fiberglass? On bare fiberglass, a minimum of two coats of Interlux Micron CF antifouling paint should be applied after the surface has been properly prepared.
Can Micron CF be applied without sanding the hull first? Yes, a no-sand system is available: Fiberglass No Sand Primer can be substituted for InterProtect 2000E as the undercoat, allowing Micron CF to be applied without a full sanding of the bare fiberglass surface.
What grit sandpaper is used when prepping bare fiberglass for Micron CF? For the sanding system, the entire bare fiberglass surface should be sanded with 80-grit sandpaper until a flat matte finish is achieved, changing sandpaper frequently during the process.
What should be used to remove sanding residue before painting? After sanding bare fiberglass in preparation for Micron CF, sanding residue should be wiped off using Fiberglass Solvent Wash 202 before the antifouling paint is applied.
Is Micron CF compatible with previously applied bottom paints? Interlux Micron CF can be applied for use with existing coats of Micron Extra, Micron CSC, Fiberglass Bottomkote, Fiberglass Bottomkote ACT, Bottomkote, Bottomkote XXX, Ultra, Ultra-Kote, Tri-Lux II, and Trilux 33.
How should a previously painted hull be prepped before recoating with Micron CF? The hull should be scrubbed thoroughly with Interlux All-Purpose Boat Soap with Wax and water using a stiff brush, then flushed with fresh water to remove soap residue and allowed to dry before Micron CF antifouling paint is applied.
How do I know when a hull is ready for Micron CF after using InterProtect 2000E? The surface should be tested until it reaches the 'Ready-to-Overcoat' stage, at which point Micron CF antifouling paint can be applied immediately.
What color and size does part number 5608694 come in? Part number 5608694 is Interlux Micron CF antifouling paint in black, packaged in a one-gallon container.
How much does a gallon of Micron CF weigh? A gallon of Interlux Micron CF antifouling paint (5608694) weighs 14.6 pounds.
How can I check if wax contamination remains on the hull before painting? Lightly spray the surface with water; if the water beads up or separates, wax contamination is still present and cleaning with Interlux All-Purpose Boat Soap with Wax should be repeated until the water no longer beads before applying Micron CF.