What is Interlux Micron CSC?

Interlux Micron CSC is a self-polishing ablative antifouling bottom paint applied below the waterline to protect boat hulls against barnacles, algae, and other marine fouling.

What colors and sizes are available?

Micron CSC is available in Green or Red, each supplied in a 1 gallon container.

How do I choose between Green and Red?

Both colors offer identical ablative antifouling performance, so choose based on contrast with your hull or previous bottom paint layer, or to match your boat's color scheme; picking a contrasting color to the prior coat also makes it easier to track wear over time.

How many coats should I apply?

Apply a minimum of two coats of the antifouling paint for proper protection, with a third coat recommended at the waterline and leading edges where wear is heaviest.

How much area does one gallon cover?

One gallon typically covers a hull up to roughly 20-25 feet with two coats; larger hulls or additional coats will require more than one gallon.

Can Micron CSC be used on bare fiberglass?

Yes. On bare fiberglass, sand the entire surface with 80-grit sandpaper until a flat matte finish is obtained, then wipe off the sanding residue with Fiberglass Solvent Wash 202 before painting.

Is there a no-sand option for priming?

Yes. For a no-sand system, Fiberglass No Sand Primer can be substituted for InterProtect 2000E.

Is Micron CSC suitable for both salt and fresh water use?

Yes, Micron CSC is formulated to perform effectively in both salt water and fresh water environments.

Interlux Micron CSC Ablative Bottom Paint - 1 Gal

Interlux Micron CSC Ablative Antifouling Bottom Paint - Available in Green or Red, 1 Gallon

$359.32

Interlux Micron CSC is a self-polishing ablative antifouling bottom paint engineered to protect boat hulls below the waterline from barnacles, algae, and other fouling organisms across a full boating season. As the paint gradually and evenly wears away with the boat's movement through the water, it continuously exposes fresh biocide at the surface, preventing the paint buildup that plagues hard bottom paints while multi-season leaching remains effective even during long periods on a trailer or at the dock. Micron CSC is suitable for use in both salt and fresh water and performs well on boats that sit idle as well as those in regular use, making it a dependable choice for sailboats, powerboats, and trailerable boats alike.

Specifications

Brand: Interlux
Type: Ablative (self-polishing) antifouling bottom paint
Coats Required: Two coats minimum
Compatible Primers: InterProtect 2000E or Fiberglass No Sand Primer
Surface Prep Sandpaper: 80-grit
Container Size: 1 Gallon
Suitable For: Fiberglass, wood, and properly primed metal hulls
Water Type: Fresh and salt water

Sizes & Options

This line is offered in a single 1 gallon container size, available in two colors: Green and Red. One gallon typically covers hulls up to roughly 20-25 feet depending on hull shape and number of coats applied; larger boats or those receiving a third coat should order additional gallons accordingly. Choose the color that best contrasts with your hull's gelcoat or previous bottom paint layer so you can visually confirm even coverage and monitor wear over the season, or simply match your preferred boot stripe and hull color scheme.

Interlux Micron CSC Ablative Antifouling Bottom Paint - Available in Green or Red, 1 Gallon

Specifications

Sizes & Options

You may also like

Join our email list

Your cart is empty

Your cart is empty