What type of antifouling paint is Micron CSC?

Micron CSC is an ablative (self-polishing) antifouling bottom paint that wears away at a controlled rate using Micron Technology to protect against all types of fouling.

Which size should I choose?

Choose a quart for touch-ups or smaller boats needing a single coat, and a gallon for full-hull applications or larger vessels that require multiple coats. Coverage is about 12.5 square feet per gallon per coat.

What colors are available?

Micron CSC comes in Blue, Black, and Green, each available in quart and gallon sizes (Green quart and Black gallon are offered in this line).

How many coats should I apply?

Apply a minimum of two coats of the antifouling paint for proper protection; high-wear areas like the waterline, bow, and leading edges of the keel and rudder may benefit from an extra coat.

Do I need to sand between seasons before reapplying?

Because Micron CSC polishes away at a controlled rate, it reduces build-up of old coatings and minimizes sanding at reapplication compared to hard bottom paints.

Can the boat be hauled and relaunched without recoating?

Yes. The controlled-polishing action allows the boat to be hauled and launched again without recoating, unlike many hard antifouling paints.

Is this paint suitable for fiberglass and wood hulls?

Yes, Micron CSC is formulated for use over properly prepared fiberglass, wood, and existing antifouling coatings.

How do I prepare bare fiberglass before painting?

Sand the entire surface well with 80-grit sandpaper until a flat matte finish is achieved, changing sandpaper frequently, then wipe off residue with an appropriate solvent wash before applying primer and topcoats.

Interlux Micron CSC Ablative Bottom Paint - Qt & Gal

Interlux Micron CSC Ablative Antifouling Bottom Paint - Available in Quart and Gallon, Blue, Black, or Green

$359.32

Size Gallon Quart

Color Blue Black Green

Interlux Micron CSC is a premium ablative (self-polishing) antifouling bottom paint built on Micron Technology, engineered to control the release rate of biocide so protection stays consistent from launch to haul-out. Unlike hard paints that build up layer after layer, Micron CSC wears away in a controlled, predictable manner as the boat moves through the water, which means less sanding, less build-up, and a smoother bottom season after season. It is suitable for haul-and-relaunch without recoating, making it a favorite for boaters who move between fresh and saltwater or store their boats mid-season. Formulated for use over fiberglass, wood, and properly prepared existing antifouling coatings, Micron CSC delivers reliable defense against barnacles, algae, slime, and other fouling organisms that slow a boat down and increase fuel consumption.

Specifications

Brand: Interlux
Product Line: Micron CSC
Paint Type: Ablative (self-polishing)
Finish: Gloss
Item Form: Liquid, Oil-based
Container Type: Can
Coverage: Approximately 12.5 square feet per gallon (per coat)
Surface Recommendation: Fiberglass, wood, copper/existing antifouling
Specific Uses: Boat hulls, below waterline
Water Resistance: Water resistant, outdoor use

Sizes & Options

Micron CSC is offered in Quart and Gallon containers, and in Blue, Black, and Green color options. Choose your container size based on hull size and number of coats: a quart typically covers smaller boats or touch-up work, while a gallon suits full-hull applications on larger vessels or boats requiring multiple coats. Pick a color that complements your hull design or matches your existing antifouling coat for consistent appearance after the ablative layer wears through to prior coats.

Interlux Micron CSC Ablative Antifouling Bottom Paint - Available in Quart and Gallon, Blue, Black, or Green

Specifications

Sizes & Options

You may also like

Join our email list

Your cart is empty

Your cart is empty