Interlux Schooner Gold High-Gloss Marine Varnish - Quart (32 fl oz) Waterproof Wood Finish
Interlux Schooner Gold High-Gloss Marine Varnish - Quart (32 fl oz) Waterproof Wood Finish
Interlux Schooner Gold is a premium high-gloss marine varnish formulated to protect and beautify exterior and interior wood on boats. It builds a deep, warm gold-toned finish that resists water and weather while bringing out the natural grain of teak, mahogany, and other brightwork. Supplied in a full quart (32 fl oz) can for brush application.
Specifications
- Brand: Interlux
- Manufacturer Part Number: 5510170
- Product: Schooner Gold Varnish
- Type: Marine Varnish
- Color: Gold
- Finish: High Gloss
- Size: 32 fl oz (Quart), Pack of 1
- Form: Liquid
- Surface: Wood
- Application: Brush
- Recoat / Sanding Time: 4-6 hours
- Dry Time: 24 hours
- Waterproof: Yes, water resistant
- UPC: 081948000031
How to Use
For a bright, durable build, apply multiple coats, allowing each coat to dry before lightly sanding to remove any fuzz caused by grain swelling. Sand between coats with 220-320 grit wet-or-dry sandpaper and remove all sanding residue with a solvent-dampened cloth before recoating. On previously coated wood, wet sand with 120-150 grit paper and wipe clean before building fresh coats.
Frequently Asked Questions
What is Interlux Schooner Gold Varnish used for? It is a high-gloss marine varnish used to protect and finish exterior and interior wood on boats, including brightwork such as teak and mahogany. It provides a durable, water-resistant, high-gloss coating.
What color and finish does it produce? Schooner Gold produces a warm gold-toned, high-gloss finish that highlights the natural grain of the wood.
How much varnish is in each can? Each can contains a full quart, which is 32 fluid ounces (Pack of 1).
Is this varnish waterproof? Yes. It is formulated to be waterproof and water resistant, making it suitable for marine wood exposed to moisture and weather.
How many coats should I apply? Build the finish with multiple coats, sanding lightly between each coat to remove fuzz from grain swelling and to promote adhesion for a smooth, deep gloss.
What grit sandpaper should I use between coats? Sand between coats with 220-320 grit wet-or-dry sandpaper. For previously coated or bare wood preparation, wet sand with 120-150 grit wet-or-dry paper.
How do I prepare the surface before recoating? Remove all sanding residue by wiping the surface with a rag dampened with the proper solvent. Wipe only small areas at a time and change rags frequently to avoid leaving contamination behind.
How long should each coat dry before sanding? Allow each coat to dry, typically about 4-6 hours, before lightly sanding. Full dry time is approximately 24 hours.
What surfaces can I apply Schooner Gold to? It is recommended for wood surfaces, including exterior and interior brightwork on boats.
How is the varnish applied? It is applied by brush, working with the grain and building thin, even coats for the best gloss and durability.
What is the manufacturer part number? The manufacturer part number for this quart of Schooner Gold Varnish is 5510170.