Interlux Special Thinner 216 - Quart, Antifouling Paint Thinner and Equipment Cleaner
Interlux Special Thinner 216 - Quart, Antifouling Paint Thinner and Equipment Cleaner
Interlux Special Thinner 216 is a solvent formulated to thin antifouling paints and clean application equipment. In very hot or windy conditions, up to 10% may be added to aid application, helping the paint flow and level so you achieve a consistent, correct film thickness. It also serves as an effective equipment cleaner, and is best used immediately after painting to keep brushes and rollers in good condition.
Specifications
- Brand: Interlux
- Manufacturer Part Number: 5608452
- Volume: 1 quart
- Category: Thinners and Solvents
- Primary use: Thinning antifouling paints and cleaning equipment
- Maximum thinning ratio: Up to 10% in very hot or windy conditions
- Weight: 2.1 lb
- Package dimensions: 8 x 9.75 x 8 in
- UPC: 081948402163
Application Notes
- Except for the first coat on bare wood, thinning antifouling paints is not generally advised; add solvent only to aid application in extreme conditions.
- Suitable as a thinner and equipment cleaner for most antifoulings; always read the paint label before application, as this does not apply to every product.
- Clean equipment immediately after use for best results.
- Follow overcoating and immersion times carefully, and allow paint to dry thoroughly before launch.
Frequently Asked Questions
What is Interlux Special Thinner 216 used for? It is used to thin antifouling paints and to clean application equipment such as brushes and rollers.
How much thinner should I add to antifouling paint? Up to 10% may be added to aid application in very hot or windy conditions. In most other situations, thinning antifouling paint is not advised.
Can I use Special Thinner 216 with any antifouling paint? It is suitable as a thinner and equipment cleaner for most antifoulings, but not all. Always read the paint label before application to confirm compatibility.
Should I thin the first coat on bare wood? Thinning the first coat on bare wood is one of the few cases where thinning antifouling is appropriate. For subsequent coats, thinning is generally not recommended except to aid application in extreme conditions.
How do I clean my equipment after painting? Use Special Thinner 216 as an equipment cleaner. It is best to clean brushes, rollers, and other equipment immediately after use.
What size is this container? This is a 1 quart container.
Why is it important not to over-thin antifouling paint? Applying the correct film thickness is critical to antifouling performance. Over-thinning can reduce the applied thickness, so thinner should only be added when needed to aid application.
How long should paint dry before launching the boat? Follow the overcoating and immersion times on the paint label carefully. Water is an aggressive environment, so allow the paint to dry thoroughly before launch to avoid detachment.
Does thinning affect overcoating and immersion times? You should always follow the overcoating and immersion times specified for your antifouling paint. Improper timing is one of the biggest causes of antifouling detachment.
What is the weight of this product? The product weighs approximately 2.1 lb.