Interlux VC Performance Epoxy 2-Part Kit, 2 Gallon (MPN 5608366) Two-Component Marine Epoxy System
Interlux VC Performance Epoxy 2-Part Kit, 2 Gallon (MPN 5608366) Two-Component Marine Epoxy System
Interlux VC Performance Epoxy is a two-component marine epoxy supplied as a complete 2 gallon kit. Formulated for boat hull surface preparation and coating work, it is mixed from two parts and applied to clean, dry surfaces, then allowed to cure before topcoating.
Specifications
- Brand: Interlux
- Manufacturer Part Number: 5608366
- Type: Two-part (2-component) epoxy kit
- Kit size: 2 gallon
- UPC: 081948191272
- Item weight: 15 pounds
- Package dimensions: 7.25 x 13.75 x 7.75 inches
Use and Cure
- Surface must be clean and dry before application.
- After applying, allow epoxy to cure a minimum of 3 to 7 days; in cool temperatures allow 7 days for clear epoxies to fully cure.
- Clean cured epoxy by scrubbing with a stiff brush using All-Purpose Boat Soap with Wax and water, then rinse with fresh water to remove soap residue.
- When applying varnish over cured clear epoxy, apply 4 to 6 coats; when dry (4 to 6 hours) sand lightly to remove fuzz caused by grain swelling.
Frequently Asked Questions
How many parts does this epoxy have? It is a two-component epoxy kit, meaning it is supplied as two separate parts that are combined before application.
What size is the kit? This is a 2 gallon kit.
How long does the epoxy need to cure? Allow a minimum of 3 to 7 days to cure. In cool temperatures, allow 7 days for clear epoxies to fully cure.
How should the surface be prepared before application? The surface must be clean and dry before the epoxy is applied.
How do I clean the cured epoxy surface? Scrub the cured epoxy with a stiff brush using All-Purpose Boat Soap with Wax and water, then rinse with fresh water to remove any soap residue.
Can I apply varnish over this epoxy? Yes. When varnishing over cured clear epoxy, apply 4 to 6 coats. Once dry after 4 to 6 hours, sand lightly to remove fuzz caused by grain swelling.
What is the manufacturer part number? The manufacturer part number is 5608366.
Will sanding remove surface contamination before coating? No. Sanding will not remove surface contamination, so the surface must be properly cleaned before applying the epoxy.
What is the weight of the kit? The kit weighs 15 pounds.
What are the package dimensions? The package measures 7.25 x 13.75 x 7.75 inches.