Jabsco 10-Blade Impeller 9200-0023-P, Nitrile with Brass Insert, 1-9/16 Inch Diameter

The Jabsco 10-Blade Impeller (9200-0023-P) is a nitrile impeller built with a brass insert and hub, engineered for pumping applications that go beyond plain raw water. It is designed to handle a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, and lubricating and machine cutting oil, making it well suited to marine engine water pumps and bilge pumps where contaminated fluids pass through the system. The impeller uses a single flat drive configuration and carries 10 blades to help maintain flow under high-pressure usage.

Because it is a nitrile compound rather than standard neoprene, this impeller is intended for oil-tolerant duty, giving it a role in systems that circulate or transfer heavily contaminated water or light oils. Performance is rated for a temperature range of 50 degrees F to 180 degrees F; running it below that range can reduce priming ability and overall performance, so it should be matched to applications within its rated temperature window. The brass insert and hub add rigidity at the drive point, supporting the impeller through repeated engagement in the pump housing.

Specifications

• Brand: Jabsco
• Manufacturer Part Number: 9200-0023-P
• Drive Type: Single Flat Drive
• Blade Count: 10
• Impeller Material: Nitrile
• Insert/Hub Material: Brass
• Overall Diameter: 1-9/16 inches
• Width: 1-19/32 inches
• Depth: 3/4 inch
• Shaft Diameter: 5/16 inch
• Operating Temperature Range: 50 degrees F to 180 degrees F
• Weight: 0.2 pounds
• UPC: 671880591867

Frequently Asked Questions

What fluids can the Jabsco 9200-0023-P impeller handle? The Jabsco 9200-0023-P handles a wide range of oils, oil and water emulsions, diesel fuel, lower fraction hydrocarbons, kerosene, and lubricating and machine cutting oil, in addition to heavily contaminated water.

Is this impeller made of neoprene? No, the 9200-0023-P is made of nitrile rather than neoprene, which is why it is rated for oil and fuel-contact fluids in addition to water.

What is the shaft diameter of the Jabsco 9200-0023-P? The shaft diameter is 5/16 inch on the Jabsco 9200-0023-P 10-blade impeller.

How many blades does this impeller have? This Jabsco impeller has 10 blades, using a single flat drive to engage the pump shaft.

What is the overall diameter and width of the 9200-0023-P? The overall diameter is 1-9/16 inches, the width is 1-19/32 inches, and the depth is 3/4 inch.

What material is the insert or hub made from? The insert and hub on the Jabsco 9200-0023-P are made of brass, while the blades themselves are nitrile.

What pumps is this impeller designed to fit? The Jabsco 9200-0023-P is designed to fit a variety of pumps used in marine applications, including marine engine water pumps and bilge pumps.

What temperature range should this impeller be used in? The 9200-0023-P performs best between 50 degrees F and 180 degrees F; operating below that range can reduce its priming ability and performance.

Can this impeller be used for bilge pump duty as well as engine cooling? Yes, the Jabsco 9200-0023-P is compatible with both marine engine water pumps and bilge pumps, particularly where oil-contaminated water needs to be transferred.

How much does the Jabsco 9200-0023-P weigh? The Jabsco 9200-0023-P impeller weighs 0.2 pounds.

Why choose a brass-insert nitrile impeller over a standard water impeller? The brass insert and nitrile blade material on the 9200-0023-P allow it to handle oils and heavily contaminated fluids at high pressure, a duty that standard water-only impellers are not built for.

Is the Jabsco 9200-0023-P genuine Jabsco? Yes, the 9200-0023-P is a genuine Jabsco 10-blade impeller, identified by Jabsco under this part number.