Jabsco 12V Electric Marine Toilet Conversion Kit 37010-0092 - Fits Groco, Raritan, Wilcox Crittenden, Mansfield, Sealand

The Jabsco Marine Toilet Electric Conversion Kit (37010-0092) converts a manual marine toilet into a 12 volt DC electric flush toilet using a push-button switch. The kit is built around a flexible impeller flush pump paired with a high-capacity macerator and bowl scavenger pump, so flushing and waste discharge happen with a single button press instead of manual hand pumping. The flushing pump is self-priming with vertical lift up to 6 feet (1.9 m), and the system may be installed as much as 3 feet (1 m) below the waterline.

Power comes from a permanent magnet type motor that is fully enclosed and fitted with a stainless steel shaft for corrosion resistance, protected by a 25 amp fuse on the 12 volt circuit. This is a comprehensive conversion kit: it includes the flushing pump, macerator pump, push-button switch, adaptors, hose, clamps, and fastenings needed for the installation, all made from corrosion-resistant materials suited to marine use. The kit complies with USCG 183.410 and ISO 8846 MARINE requirements for ignition protection, making it suitable for installation in gasoline-powered vessels.

This conversion kit is designed to fit most toilets that use a 4-bolt screw pattern on a 3 3/4 inch (95 mm) diameter bolt circle, including toilets from Groco, Raritan, Wilcox Crittenden, Mansfield, and Sealand, allowing an existing manual bowl to be upgraded to electric operation without replacing the whole toilet.

Specifications

• Brand: Jabsco
• Manufacturer Part Number: 37010-0092
• Voltage: 12 VDC
• Fuse Rating: 25 Amp
• Pump Type: Flexible impeller flush pump with high-capacity macerator and bowl scavenger pump
• Motor Type: Permanent magnet type, fully enclosed, with stainless steel shaft
• Self-Priming Vertical Lift: Up to 6 feet (1.9 m)
• Maximum Installation Depth Below Waterline: 3 feet (1 m)
• Bolt Pattern: 4-bolt screw pattern on a 3 3/4 inch (95 mm) diameter bolt circle
• Compatible Toilet Brands: Groco, Raritan, Wilcox Crittenden, Mansfield, Sealand
• Ignition Protection Compliance: USCG 183.410 and ISO 8846 MARINE
• Included Components: Flushing pump, macerator pump, push-button switch, adaptors, clamps, hose, fastenings
• Color: White
• Material: Corrosion resistant materials for marine use
• Weight: 6.75 pounds

Fitment

• 4-bolt screw pattern on a 3 3/4 inch (95 mm) diameter bolt circle
• Groco toilets
• Raritan toilets
• Wilcox Crittenden toilets
• Mansfield toilets
• Sealand toilets

Frequently Asked Questions

What does the Jabsco 37010-0092 conversion kit actually include? The kit includes everything needed to convert a manual marine toilet to electric operation: a flexible impeller flushing pump, a high-capacity macerator and bowl scavenger pump, a push-button switch, adaptors, hose, clamps, and fastenings.

What toilets is this kit compatible with? This kit is designed to convert toilets that use a 4-bolt screw pattern on a 3 3/4 inch (95 mm) diameter bolt circle, which covers most toilets from Groco, Raritan, Wilcox Crittenden, Mansfield, and Sealand.

Is the Jabsco 37010-0092 kit 12 volt or 24 volt? It is a 12 volt DC kit, protected by a 25 amp fuse in the electrical circuit.

How does the flush operate once this kit is installed? Flushing is push-button operated: the flexible impeller pump draws in flush water and the macerator and bowl scavenger pump discharges waste, replacing manual hand-pump flushing.

How far below the waterline can this conversion kit be installed? The 37010-0092 kit may be installed up to 3 feet (1 m) below the waterline.

What is the self-priming lift capability of the flush pump? The flushing pump is self-priming with a vertical lift of up to 6 feet (1.9 m).

Is this conversion kit safe for use in a gasoline engine compartment? Yes, the Jabsco 37010-0092 kit complies with USCG 183.410 and ISO 8846 MARINE requirements for ignition protection.

What is the motor construction on this kit's pumps? Both pumps in the 37010-0092 kit run on a permanent magnet type motor that is fully enclosed and uses a stainless steel shaft for corrosion resistance.

Are the materials in this kit corrosion resistant? Yes, all components in the Jabsco electric toilet conversion kit are made from corrosion resistant materials suited to marine use.

How much does the Jabsco 37010-0092 conversion kit weigh? The kit weighs 6.75 pounds.

Can this kit replace a manual flush toilet without buying a whole new toilet? Yes, that is the purpose of the 37010-0092 kit: it converts an existing manual marine toilet with a compatible 4-bolt, 3 3/4 inch bolt circle to push-button electric flushing.