Jabsco 17860-2012 Flat Tank 12V Marine Oil Change System, 3.5 Gallon Diaphragm Pump

The Jabsco 17860-2012 Flat Tank Marine Oil Change System takes the mess and awkwardness out of changing engine oil on board. This self-contained 12V DC unit draws used oil out through the engine dipstick tube using a self-priming diaphragm pump, so there is no need to crawl underneath the engine or deal with an open drain pan. The pump is run-dry capable, protecting it if the oil supply runs out before the switch is turned off.

Oil is collected in the unit's own 3.5 gallon (13 liter) flat tank, which can be stored flat or upright, making it easy to fit into a deck box, lazarette, or storage locker. Once the tank is full, the oil is emptied cleanly through an easy-pour spout with a screw cap, avoiding spills during disposal. The unit includes a dipstick suction tube, battery clamp leads, and an on/off switch built into a carry handle for straightforward, single-person operation. Running on 12 volts only, the pump delivers an output of 0.4 gallons per minute and works best when the engine oil is at operating temperature. The body and container are polypropylene, with a Geolast diaphragm and Viton diaphragm valves for durability against oil and heat exposure. A 6 foot power cord with alligator clips and an 8 foot oil- and heat-resistant suction tube give enough reach to work around most engine compartments.

Specifications

• Brand: Jabsco
• Manufacturer Part Number: 17860-2012
• Product Name: Flat Tank Premium Marine Oil Change System
• Tank Capacity: 3.5 gallons (13 liters)
• Pump Type: Self-priming diaphragm pump, run dry capable
• Pump Output: 0.4 gallons per minute
• Voltage: 12 volts DC only
• Amp Draw: 2 amps
• Fuse Size: 5 amps
• Power Cord Length: 6 feet, with alligator clips
• Suction Tube Length: 8 feet, oil and heat resistant
• Body Material: Polypropylene
• Diaphragm Material: Geolast
• Diaphragm Valve Material: Viton
• Weight: 8.5 pounds
• Design: Flat tank, stores flat or upright, integrated carry handle
• Included Components: Dipstick suction tube, battery clamp leads, on/off switch, carry handle, easy-pour spout with screw cap

Fitment

This is a portable, self-contained oil change system that connects via the dipstick tube and is not engine-specific; it is designed for general use on boat engines that use a dipstick.

Frequently Asked Questions

How much oil does the Jabsco 17860-2012 hold? The Jabsco 17860-2012 Flat Tank Oil Change System has a 3.5 gallon (13 liter) capacity, enough to hold the used oil from most engine oil changes in a single self-contained tank.

What voltage does this oil changer run on? It runs on 12 volts DC only, drawing 2 amps and protected by a 5 amp fuse in the power cord.

How is oil removed from the engine with the 17860-2012? Oil is drawn out through the engine's dipstick tube using the included dipstick suction tube and the unit's self-priming diaphragm pump, so there is no need to access the oil pan directly.

Can the pump run dry without being damaged? Yes, the diaphragm pump in the Jabsco 17860-2012 is run dry capable, so it is protected if it continues running briefly after the oil has been fully removed.

How is the collected oil emptied from the unit? Once oil change is complete, the tank empties through an easy-pour spout with a screw cap, allowing clean, controlled disposal without spills.

What is the unit made of? The Jabsco 17860-2012 has a polypropylene body and container, a Geolast diaphragm, and Viton diaphragm valves for resistance to oil and heat.

How much does the Jabsco 17860-2012 weigh? This oil change system weighs 8.5 pounds.

How long are the power cord and suction tube? The power cord is 6 feet long with alligator clips for battery connection, and the suction tube is 8 feet long and rated for oil and heat resistance.

Does the 17860-2012 stand upright or lie flat for storage? Its flat tank design allows it to be stored either standing upright or lying flat, which helps it fit into deck boxes and storage lockers.

What is included with the Jabsco 17860-2012 oil change system? The system includes the dipstick suction tube, battery clamp leads, an on/off switch, a built-in carry handle, and an easy-pour spout with screw cap.

How does this compare to the Jabsco Porta-Quick oil changer? The Jabsco 17860-2012 uses a flat tank with a self-priming diaphragm pump and 3.5 gallon capacity, while the Porta-Quick series uses a bronze pump head with a larger 14 quart holding container designed to service two engines.

Is this oil changer specific to one engine make or model? No, the Jabsco 17860-2012 is a portable, self-contained unit that connects through the dipstick tube and is not limited to a specific engine make or model.