Jabsco 17954-0001-P Impeller, Replaces Mercruiser 47-59362, Neoprene 2-9/16 Inch Water Pump Impeller

The Jabsco 17954-0001-P is a neoprene water pump impeller built to replace Mercruiser 47-59362 in marine engine cooling pumps. Neoprene construction gives the impeller a long working life under continuous pumping duty, and the part is sized specifically for use with the Jabsco 43210-0001 marine engine cooling pump. The impeller has a single flat drive type and a brass insert at the hub for a secure, wear-resistant fit on the pump shaft.

Each impeller ships with lubricant and a gasket included, along with installation instructions, so a straightforward pump service can be completed without hunting down separate parts. Installation follows the standard Jabsco impeller service procedure: remove the endcover screws, endcover, and old gasket, pull the worn impeller with a Jabsco removal tool, clear any debris from the pump chamber, lubricate the pump wall, and twist the new impeller into the bore before fitting the new gasket and endcover and tightening the screws back down.

This impeller is a direct fit for engines and pumps that call for Mercruiser 47-59362, making it a straightforward like-for-like replacement when a raw water or engine cooling impeller has worn out, hardened, or lost blades.

Specifications

• Brand: Jabsco
• Manufacturer Part Number: 17954-0001-P
• Diameter: 2-9/16 inches
• Width: 2 inches
• Shaft Diameter: 3/4 inch
• Drive Type: Single Flat
• Material: Neoprene
• Insert: Brass
• Blades: 10
• Weight: 0.6 pounds
• UPC: 671880588188
• Compatible Pump: Jabsco 43210-0001 marine engine cooling pump
• Includes: Lubricant, gasket, installation instructions

Fitment

• Mercruiser engines requiring impeller 47-59362
• Jabsco 43210-0001 marine engine cooling pump

Replaces (OEM)

• Mercruiser 47-59362

Frequently Asked Questions

What does the Jabsco 17954-0001-P impeller replace? The Jabsco 17954-0001-P is a direct replacement for Mercruiser 47-59362.

What pump is this impeller designed for? This impeller is designed for use with the Jabsco 43210-0001 marine engine cooling pump.

What material is the 17954-0001-P impeller made from? It is made from neoprene, chosen for its durability under continuous pumping duty, with a brass insert at the hub.

What is the diameter and width of this impeller? The Jabsco 17954-0001-P measures 2-9/16 inches in diameter and 2 inches in width.

How many blades does this impeller have? It has 10 blades.

What is the shaft diameter and drive type? The shaft diameter is 3/4 inch, and the drive type is single flat.

Does this impeller come with a gasket and lubricant? Yes, the 17954-0001-P kit includes lubricant and a gasket along with installation instructions.

How much does the impeller weigh? The Jabsco 17954-0001-P weighs 0.6 pounds.

How is the impeller installed? Installation involves removing the endcover screws, endcover, and old gasket, pulling the worn impeller with a Jabsco removal tool, clearing debris from the pump chamber, lubricating the pump wall, twisting the new 17954-0001-P impeller into the bore, and fitting the new gasket and endcover before tightening the screws.

Is this a genuine Jabsco part or an aftermarket copy? The 17954-0001-P is a genuine Jabsco impeller, not a generic aftermarket copy.

Why does an impeller need to be replaced periodically? Neoprene impellers like the 17954-0001-P wear down over time and can lose blades or harden, which reduces cooling water flow, so keeping a spare on hand for the engine cooling system is recommended.

What is the UPC for this part? The Jabsco 17954-0001-P carries UPC 671880588188.