Jabsco 34060-0130 Boat Engine Oil Drain Pump - Polished Brass Hand Pump for OMC and Mercruiser Dipstick Tubes

The Jabsco 34060-0130 Boat Engine Oil Drain Pump is a polished brass hand pump built for draining engine and gearbox oil through the dipstick tube on popular marine engines such as OMC and Mercruiser. It connects directly to the dipstick tube using a 3/4 inch brass fitting, so oil changes can be done without removing a drain plug or getting underneath the engine.

The pump body and cylinder are constructed of long-life, corrosion-resistant polished brass, while the internal plungers are oil-resistant for repeated use in engine and gearbox oil service. It is self-priming and operates with simple one-handed pumping, moving oil at a rate of 40 strokes per gallon. Intake and discharge caps are included to keep the pump clean and ready to use between oil changes. A 1/2 inch by 2 foot drain hose is included, allowing oil to be routed directly into a collection container.

Measuring 10-1/4 inches long with a 1-1/4 inch diameter, this pump is compact enough to store in a toolbox or engine compartment. Do not use with oil that exceeds 140 degrees Fahrenheit.

Specifications

• Brand: Jabsco
• Manufacturer Part Number: 34060-0130
• Product Type: Marine Oil Drain Pump
• Material: Brass
• Finish: Polished
• Pump Type: Self-priming piston hand pump
• Output Rate: 40 strokes per gallon
• Fitting: 3/4 inch brass fitting
• Included Hose: 1/2 inch x 2 feet drain hose
• Dimensions: 10-1/4 inches long x 1-1/4 inches diameter
• Maximum Oil Temperature: 140 degrees Fahrenheit
• Weight: 1.01982379 pounds
• UPC: 671880028646

Fitment

• Connects to the engine oil dipstick tube on popular marine engines including OMC and Mercruiser

Frequently Asked Questions

What engines does the Jabsco 34060-0130 oil drain pump fit? The Jabsco 34060-0130 connects directly to the engine oil dipstick tube on popular marine engines such as OMC and Mercruiser.

How is the oil drained with this pump? The pump attaches to a 3/4 inch fitting on the dipstick tube and, once primed, is operated with simple one-handed pumping to draw oil out through the included 1/2 inch by 2 foot drain hose.

What material is the Jabsco 34060-0130 made from? It is made of polished, corrosion-resistant brass, with oil-resistant plungers inside a long-life brass cylinder.

Is priming required before use? No, the Jabsco 34060-0130 is a self-priming pump, so it does not need to be manually primed before pumping begins.

What are the dimensions of this oil drain pump? The Jabsco 34060-0130 measures 10-1/4 inches long with a 1-1/4 inch diameter cylinder.

How much oil does one full pumping cycle move? The pump moves oil at a rate of 40 strokes per gallon, allowing a full oil change to be completed with steady one-handed pumping.

What is included with the Jabsco 34060-0130? The kit includes the brass pump with a 3/4 inch brass fitting and a 1/2 inch by 2 foot drain hose.

Is there a temperature limit for the oil being drained? Yes, oil temperature should not exceed 140 degrees Fahrenheit when using the Jabsco 34060-0130.

How much does the Jabsco 34060-0130 weigh? The Jabsco 34060-0130 oil drain pump weighs 1.01982379 pounds.

Can this pump be used on gearbox oil as well as engine oil? Yes, the Jabsco 34060-0130 is designed to drain both engine and gearbox oil through the dipstick tube.

Does the pump include intake and discharge caps? Yes, intake and discharge caps are included with the Jabsco 34060-0130 to keep the pump clean between uses.