Johnson Pump Viking Power 16 12V Self-Priming Waste Water Pump 10-13350-03

The Johnson Pump Viking Power 16 is a 12-volt, single-chamber diaphragm pump built for pumping waste water, whether installed after the drain outlet in a wastewater system or set up as a bilge pump aboard a leisure craft. The self-priming diaphragm is made of reinforced premium nitrile rubber and can be swapped out without removing the pump from the system, keeping maintenance simple. Non-choke valves mean no in-line filters are required, and the pump can be run dry or handle a mixture of air and water without damage.

Housed in a glass-fiber reinforced nylon body with nitrile rubber valves, the Viking Power 16 delivers an open flow capacity of 4.2 GPM (4.0 GPM at 0.1 bar) with a max lift and max head of 9.8 feet, and self-primes to a height of 3 meters. A low pulse design and muffled rubber mounting bracket keep operation quiet, and low power consumption makes it easy to run on a 12V system protected by an 8 Amp fuse. It connects using 1 inch and 3/4 inch KlickTite XL connectors, with a 90 degree option available, and its compact footprint allows installation even in tight spaces.

Specifications

• Brand: Johnson Pump
• Manufacturer Part Number: 10-13350-03
• Product Name: Viking Power 16 Waste Water Pump
• Voltage: 12V DC
• Fuse Rating: 8 Amp
• Body Material: Nylon, glass-fiber reinforced
• Valve Material: Nitrile rubber
• Diaphragm Material: Reinforced nitrile rubber
• Open Flow Capacity: 4.2 GPM
• Capacity at 0.1 bar: 4.0 GPM
• Max Lift: 9.8 feet
• Max Head: 9.8 feet
• Self-Priming Height: 3 meters
• Connection: 1 inch and 3/4 inch KlickTite XL connectors, 90 degree (optional)
• Length: 7.3 inches
• Width: 8.9 inches / 7.1 inches
• Height: 4.6 inches / 8 inches
• Weight: 6.4 pounds
• UPC: 7330717009007

Frequently Asked Questions

What is the Johnson Pump Viking Power 16 used for? The Viking Power 16 (part 10-13350-03) is a 12V diaphragm pump designed to pump waste water, either installed after the drain outlet in a boat's wastewater system or set up as a bilge pump.

Can the Viking Power 16 run dry without being damaged? Yes, the Johnson Pump Viking Power 16 can be run dry and can also handle a mixture of air and water without difficulty.

Does this pump need an in-line filter? No. The Viking Power 16's non-choke valves eliminate the need for in-line filters.

What is the open flow capacity of the 10-13350-03 pump? The Johnson Pump 10-13350-03 has an open flow capacity of 4.2 GPM, dropping to 4.0 GPM at 0.1 bar of back pressure.

How high can this pump self-prime? The Viking Power 16 self-primes to a height of 3 meters, with a max lift and max head of 9.8 feet.

What voltage does the Viking Power 16 run on? It is a 12V DC pump protected by an 8 Amp fuse.

What are the diaphragm, body, and valves made of? The Viking Power 16 has a glass-fiber reinforced nylon body, nitrile rubber valves, and a reinforced nitrile rubber diaphragm.

Can the diaphragm be replaced without removing the whole pump? Yes, the self-priming diaphragm on the Johnson Pump Viking Power 16 is designed to be replaced without removing the pump from the system.

What size hose connections does the 10-13350-03 use? The Viking Power 16 connects using 1 inch and 3/4 inch KlickTite XL connectors, with a 90 degree connector option available.

How much does the Viking Power 16 weigh? The Johnson Pump Viking Power 16 (10-13350-03) weighs 6.4 pounds.

Is the Viking Power 16 a quiet pump? Yes, a low pulse design and muffled rubber mounting bracket give the Viking Power 16 quiet operation.

What are the dimensions of the Viking Power 16? The pump measures 7.3 inches long, 8.9/7.1 inches wide, and 4.6/8 inches high.