Lenco 20' Flybridge Second Station LED Trim Tab Switch Kit for 15270-001/15271-001 Systems

The Lenco 20' Flybridge Second Station LED Trim Tab Switch Kit (part number 11941-002) lets you add a second trim tab control station at the flybridge of your boat. It is built to connect to Lenco's LED Indicator Integrated Tactile Switch Kit (part# 15270-001 and/or 15271-001), giving you full trim tab control from a second location without replacing your primary helm switch. The kit plugs directly into the existing harness of the Integrated Tactile Switch, so the second station key pad becomes an extension of the system already installed at the lower helm.

This kit works with 12 and 24-Volt electrical systems and is compatible with both single and dual actuator trim tab setups, making it a fit for a range of boat configurations already running Lenco's integrated tactile switch platform. The included 20-foot shielded harness runs the wiring from the primary station to the flybridge, and the Y-connector allows the second station to tie into the existing circuit without cutting or splicing the original harness. The key pad itself uses a push-button, touch-control design with quick-connect terminals for a clean, tool-light installation.

Housed in a plastic enclosure, the second station key pad carries an IP67 ingress protection rating, suited to the wet and exposed conditions of a flybridge. It uses flush mounting for a low-profile finish at the helm and is wired, not wireless, for a stable and consistent connection to the trim tab actuators. This kit is intended for boats that already have the Lenco LED Indicator Integrated Tactile Switch Kit installed at a primary station and need trim tab control added at a second helm position.

Specifications

• Brand: Lenco
• Manufacturer Part Number: 11941-002
• Style: Electric Trim Tabs
• Type: Trim Tab Switch Kit
• Compatible With: Lenco LED Indicator Integrated Tactile Switch Kit (part# 15270-001 and/or 15271-001)
• Voltage: 12 and 24 Volt
• Actuator System Compatibility: Single and Dual Actuator Systems
• Kit Includes: 20-foot Shielded Harness, Y-Connector, Second Station Key Pad
• Harness Length: 20 feet
• Current Rating: 20 Amps
• Operating Voltage (Key Pad): 12 Volts (DC)
• Contact Type: Normally Open
• Switch Type: Push Button
• Terminal Type: Quick-connect
• Material: Plastic
• Item Dimensions: 13 x 7 x 5 inches
• Circuit Type: 2-way
• Mounting Type: Flush Mount
• Number of Positions: 20
• Ingress Protection Rating: IP67
• Control Method: Touch
• Connectivity: Wired
• Compatible Vehicle Type: Boat
• Weight: 1.6 pounds
• UPC: 874847007528

Frequently Asked Questions

What does the Lenco 11941-002 kit do? The Lenco 20' Flybridge Second Station LED Trim Tab Switch Kit (part number 11941-002) adds a second trim tab control station, typically at the flybridge, so the boat's trim tabs can be operated from a second location in addition to the primary helm.

What switch system does the 11941-002 second station kit work with? This kit is designed to connect to the Lenco LED Indicator Integrated Tactile Switch Kit, part number 15270-001 and/or 15271-001, by plugging into the existing harness of that switch system.

Does the 11941-002 kit include the primary trim tab switch? No. The 11941-002 kit is a second station add-on only; it requires that a Lenco LED Indicator Integrated Tactile Switch Kit (15270-001 and/or 15271-001) is already installed as the primary station.

What is included in the box with this Lenco kit? The Lenco 20' Flybridge Second Station LED Trim Tab Switch Kit includes a 20-foot shielded harness, a Y-connector, and the second station key pad.

Is this kit compatible with 12-volt and 24-volt boats? Yes, the 11941-002 second station kit is built for both 12-Volt and 24-Volt electrical systems.

Will this kit work with a dual actuator trim tab setup? Yes. The Lenco 11941-002 kit is compatible with both single and dual actuator trim tab systems.

How long is the wiring harness on this kit? The kit includes a 20-foot shielded harness to run wiring from the primary switch station to the second station location.

What are the dimensions of the second station key pad? The second station key pad included in the 11941-002 kit measures 13 x 7 x 5 inches.

What material is the key pad made from and how durable is it in wet conditions? The key pad housing is made of plastic and carries an IP67 ingress protection rating, making it suited to the wet, exposed environment of a flybridge.

How is the second station key pad mounted? The 11941-002 key pad uses a flush mounting design and connects using quick-connect terminals for installation at the second station.

Does installing this kit require cutting into the existing switch wiring? No. The included Y-connector allows the second station key pad to tie into the existing Integrated Tactile Switch harness (part# 15270-001 and/or 15271-001) without cutting or splicing the original wiring.

Is the 11941-002 key pad a wireless remote? No, the second station key pad in this Lenco kit is a wired accessory connected through the included 20-foot shielded harness, not a wireless remote.