Lenco Electric Hatch Lift Actuator, 20 Inch Stroke, 12V/24V, Part 20778-001

The Lenco Electric Hatch Lift Actuator (part 20778-001) is a 12-volt and 24-volt powered ram designed to open and close boat hatches, engine covers, and deck lids with a smooth, controlled motion. Built around a clutchless ball screw design, the actuator never binds and runs in sync when two units are installed on a dual-lift application, making it a reliable choice for wider or heavier hatches that need coordinated lifting on both sides. The inline motor delivers over 500 pounds of force, giving it the strength to handle substantial hatch weight while maintaining precise positioning at any point in the stroke.

Construction is entirely non-corrosive: the ram tubing is clear anodized aluminum, and the mounting hardware uses stainless steel pull pins paired with high impact, corrosion proof brackets for long-term durability in a marine environment. Powdered metal gears provide strength and precision inside the actuator, while the stainless steel ram locks securely in any position along its travel, holding the hatch open or closed without drifting. The ball screw spins freely once the hatch reaches full open or full closed, which eliminates the need for limit switches and prevents burned out motors from over-travel.

Each unit ships complete with a 2 foot lead wire terminated in a Deutsch connector for a weatherproof electrical connection. The actuator is CE-certified, ignition protected, and ABYC compliant, making it suitable for installation in gasoline-powered boat compartments. With a 20 inch stroke, a 33 inch retracted length, and a 53 inch extended length, it is sized for hatches and covers that need substantial lift travel.

Specifications

• Brand: Lenco
• Manufacturer Part Number: 20778-001
• Stroke Length: 20 inches
• Retracted Length: 33 inches
• Extended Length: 53 inches
• Voltage: 12V and 24V
• Force Output: Over 500 pounds
• Lead Length: 2 feet
• Connector Type: Deutsch connectors
• Material: Clear anodized aluminum tubing, stainless steel
• Mounting Brackets: High impact, corrosion proof with stainless steel pull pins
• Gear Type: Powdered metal gears
• Design: Clutchless ball screw
• Certification: CE-certified, ignition protected, ABYC compliant
• Item Dimensions: 43.75 x 3.75 x 3.75 inches
• Weight: 8.7 pounds
• UPC: 874847001663

Frequently Asked Questions

What is the stroke length of the Lenco 20778-001 hatch lift actuator? The Lenco 20778-001 has a 20 inch stroke, with a retracted length of 33 inches and an extended length of 53 inches.

Does this actuator run on 12 volts or 24 volts? The Lenco 20778-001 electric hatch lift actuator operates on both 12V and 24V systems.

How much lifting force does this actuator produce? Its inline motor design delivers over 500 pounds of force, giving the Lenco 20778-001 enough strength to lift heavy hatches and covers.

Can two of these actuators be used on the same hatch? Yes, the clutchless ball screw design of the Lenco 20778-001 will not drift or bind, allowing two units to run in sync on dual-lift applications.

What material is the Lenco 20778-001 made from? The ram tubing is clear anodized aluminum and the mounting hardware is stainless steel, so the entire actuator is built from non-corrosive materials for marine use.

What kind of electrical connection does this actuator use? Each Lenco 20778-001 actuator comes with a 2 foot lead wire terminated in a Deutsch connector for a weatherproof connection.

Is this actuator safe to install in an engine compartment? The Lenco 20778-001 is CE-certified, ignition protected, and ABYC compliant, making it suitable for installation near gasoline engines.

Does the actuator need limit switches to stop at full travel? No, the ball screw on the Lenco 20778-001 spins freely once the hatch reaches full open or full closed, which eliminates the need for limit switches and prevents burned out motors.

How does the actuator hold the hatch open? The stainless steel ram on the Lenco 20778-001 locks in any position along its stroke, holding the hatch securely open or closed without drifting.

What is included with the Lenco 20778-001? The unit includes the actuator itself, high impact corrosion proof mounting brackets, stainless steel pull pins, and a 2 foot lead with Deutsch plug.

How much does the Lenco 20778-001 weigh? The Lenco 20778-001 electric hatch lift actuator weighs 8.7 pounds.

What are the overall dimensions of this actuator? The Lenco 20778-001 measures 43.75 x 3.75 x 3.75 inches overall.