Marinco SeaLink 12V Plug, Black - 10 Amp Marine Power Plug (12VPG)

The Marinco SeaLink 12VPG is a 12-volt power plug built for marine electrical connections where a dependable, moisture-resistant fit matters. Molded in black plastic, it uses a 2-pin direct-wired connector design that mates with standard 12V receptacles found throughout boats, RVs, and marine accessory circuits. A moisture proof sealing ring at the connection point helps keep water out of the contact area, while internal strain relief and a cord seal protect the wire connection from pulling, vibration, and flex fatigue over time.

An LED power indicator light on the plug lets you confirm at a glance that the circuit is live, which is useful for accessory plugs mounted in helm stations, cabins, or deck areas where a quick visual check saves time. The plug is protected by an interchangeable 10 amp fuse, so a blown fuse can be swapped out in the field rather than replacing the whole plug. Maximum rating for the 12VPG is 10 amps at 12 volts (10 watts), making it suited to lighting, electronics, and other accessory loads within that draw.

Specifications

• Brand: Marinco
• Manufacturer Part Number: 12VPG
• Color: Black
• Material: Plastic
• Voltage: 12 Volts
• Amperage: 10 Amps
• Wattage: 10 watts
• Connector Type: 2-pin
• Connectivity Technology: Direct Wired Connection
• Compatible Devices: Standard 12V receptacles
• Fuse: Interchangeable 10 amp fuse
• Weight: 0.05 pounds

Frequently Asked Questions

What is the maximum amperage rating of the Marinco 12VPG plug? The Marinco 12VPG is rated for a maximum of 10 amps at 12 volts, which works out to 10 watts.

Is the 12VPG plug waterproof? The Marinco 12VPG has a moisture proof sealing ring at the connection point to help keep water out of the contact area.

What color is the Marinco SeaLink 12V plug? The 12VPG is black.

What is the plug body made of? The Marinco 12VPG is made of plastic.

Does the 12VPG have a power indicator light? Yes, the plug includes an LED power indicator light so you can see when the circuit is live.

Will the 12VPG work with my boat's 12V receptacle? The Marinco 12VPG is compatible with standard 12V receptacles.

What type of connector does the 12VPG use? It uses a 2-pin, direct-wired connector.

Can the fuse in the 12VPG be replaced? Yes, the 12VPG uses an interchangeable 10 amp fuse that can be swapped out if it blows.

How much does the Marinco 12VPG weigh? The Marinco 12VPG weighs 0.05 pounds.

Does the 12VPG protect against a cord pulling loose? Yes, the plug has internal strain relief and a cord seal to protect the wire connection from pulling and vibration.

What is the part number for this Marinco plug? The part number is 12VPG.

What wattage is the Marinco 12VPG designed for? The 12VPG is rated for 10 watts (10 amps at 12 volts).