Maxwell HRC10-10 Horizontal Windlass, 12V, 3/8 Inch Chain / 5/8 Inch Rope, HRC101012V

The Maxwell HRC10-10 Horizontal Windlass is a fully automatic rope/chain windlass built for above-deck installation on larger vessels up to 52 feet. It handles rope up to 5/8 inch (16 mm) and chain up to 3/8 inch (10 mm), including the thick rope-to-chain splice, making it a versatile choice for boats running combination rope/chain rodes or all-chain systems. The two-part case pairs a die-cast, marine-grade hard-anodized alloy front section with a rugged, easily removable composite motor cover aft section, creating a watertight housing that simplifies routine on-deck maintenance.

At the heart of the HRC10-10 is Maxwell's patented Wave Design chainwheel, engineered to accommodate a wide range of chain pitch differences within its rated chain size and to smoothly guide rope and chain during retrieval. The unique wrap-around horizontal chainwheel design uses more than 90 degrees of the wheel for improved rope and chain handling. A stainless steel pressure arm exerts constant control pressure on the rode, while a cone-type clutch/brake mechanism permits manual free-fall anchoring and emergency crank recovery if power is lost. The sealed oil bath, hard-anodized alloy gearbox drives a precision worm and worm wheel for high, consistent output. Installation is a simple bolt-down process, and the integral chain pipe with a large through-deck hawse pipe throat ensures smooth entry of the rode into and out of the anchor locker.

The HRC101012V is a 12V unit and ships as a kit with a windlass circuit breaker, helm switch, dual solenoid, and emergency crank. Maxwell windlasses must be used with a chain stopper or alternative snubbing device to take the load off the windlass at anchor and to secure the anchor while under way.

Specifications

• Brand: Maxwell
• Manufacturer Part Number: HRC101012V
• Product Type: Horizontal windlass (rope/chain)
• Maximum Pull: 1870 pounds
• Static Hold: 3300 pounds
• Chain Compatibility: 3/8 inch G4 HT or 10 mm DIN 766 chain
• Rope Compatibility: 5/8 inch (16 mm) rope
• Gypsy Size: 3/8 inch chain gypsy
• Chain Retrieval Speed: 79 feet per minute
• Rope Retrieval Speed: 65 feet per minute
• Voltage: 12V DC
• Motor Power: 1200W
• Amperage Draw: 100 amps
• Recommended Circuit Breaker Size: 135 amps
• Recommended Boat Length: Typical boats up to approximately 45 to 50 feet
• Material: Stainless steel and chromed bronze with composite housing
• Manual Override: Yes, manual override / free-fall control
• Control Options: Helm switch; optional foot switches/remote
• Warranty: 3-year limited warranty
• Weight: 52.6 pounds
• UPC: 9414761103138

Frequently Asked Questions

What size boats is the Maxwell HRC10-10 designed for? The Maxwell HRC10-10 Horizontal Windlass (HRC101012V) is designed for larger vessels up to 52 feet that require a completely above-deck installation, with a typical recommended range of approximately 45 to 50 feet.

How much pulling power does the HRC101012V have? The HRC101012V has a maximum pull of 1870 pounds and a static hold rating of 3300 pounds.

What rope and chain sizes work with the HRC10-10 windlass? The HRC10-10 handles chain up to 3/8 inch (10 mm), specifically 3/8 inch G4 HT or 10 mm DIN 766 chain, and rope up to 5/8 inch (16 mm), including the thick rope-to-chain splice.

Is the Maxwell HRC101012V a 12V or 24V unit? HRC101012V is the 12V DC version of the HRC10-10 Horizontal Windlass; Maxwell also offers this windlass with a 24V power supply under a different part number.

What is included in the box with the HRC10-10 windlass? The HRC101012V kit includes the windlass, a windlass circuit breaker, a helm switch, a dual solenoid, and an emergency crank.

Does the HRC10-10 have a manual override if I lose power? Yes, the HRC10-10 uses a cone-type clutch/brake mechanism that permits manual free-fall anchoring and emergency crank recovery of the rode and anchor if power is unavailable.

What is the case of the Maxwell HRC10-10 made of? The HRC10-10 uses a two-part case: a die-cast, marine-grade hard-anodized alloy front section and a removable composite motor cover aft section, forming a watertight, corrosion-resistant housing.

How fast does the HRC10-10 retrieve rope and chain? The HRC101012V retrieves chain at 79 feet per minute and rope at 65 feet per minute.

What circuit breaker size does the HRC101012V need? A 135 amp circuit breaker is recommended for the HRC101012V, which draws approximately 100 amps during operation.

How does the HRC10-10 compare to Maxwell's smaller HRC FF-8 windlass? The HRC10-10 (HRC101012V) is rated for a larger 1870 pound maximum pull with 3/8 inch chain and 5/8 inch rope, while the HRC FF-8 is a smaller unit rated for 900 pounds maximum pull with 5/16 inch chain, making the HRC10-10 suited to larger vessels.

How is the HRC10-10 windlass installed? The HRC101012V uses a simple bolt-down installation for effortless, rapid on-deck setup, with an integral chain pipe and through-deck hawse pipe throat for smooth rode entry into the anchor locker.

What warranty comes with the Maxwell HRC10-10? The Maxwell HRC101012V Horizontal Windlass is backed by a 3-year limited warranty.