Maxwell RC10 Vertical Windlass RC101012V - 3/8" Chain, 5/8" Rope, 12V DC, Boats to 50 ft

The Maxwell RC10 Vertical Windlass (RC101012V) is a fully automatic rope/chain windlass built from marine-grade 316 stainless steel and chromed bronze for long-term durability on boats up to approximately 50 feet. It retrieves and deploys 3/8" (10 mm) short-link chain spliced to 5/8" (16 mm) three-strand or 8-plait rope, and its patented Wave Design chainwheel is engineered to accommodate a range of chain pitch differences within the specified chain size, guiding rope and chain smoothly through the wheel during anchor retrieval. It also works effectively with all-chain rodes for those who prefer that setup.

Installation is a simple two-piece design that saves time and allows retrofitting without disassembling the windlass. A unique spacer tube design accommodates virtually any deck thickness, and multiple mounting positions with a self-aligning gearbox let the gearbox and motor be positioned optimally for the installation. The heavy-duty stainless steel pressure arm, backed by a large-wire-diameter stainless steel pre-loaded spring, keeps constant control pressure on the rope/chain splice as it passes through. A huge through-deck hawse pipe throat allows easy entry of the rode into the anchor locker, and the topworks can be fully disassembled using only the handle provided and an Allen key for routine service. The sealed oil bath, hard-anodized alloy gearbox drives a precision worm and worm wheel for efficient output, and a manual override with emergency crank/clutch release handle is included for free-fall anchoring or power-loss situations.

The kit includes the RC10 windlass, a dual-direction solenoid pack, a circuit breaker/isolator panel, an up/down remote control panel, and the emergency crank/clutch release handle, giving a complete installation package out of the box.

Specifications

• Brand: Maxwell
• Manufacturer Part Number: RC101012V
• UPC: 9414761058797
• Motor Type: Vertical windlass (gypsy)
• Pulling Power: Approx. 1870 lb max pull
• Working Load: 625 lb
• Max Load: 1870 lb
• Retrieval Speed: 79 ft/min chain, 65 ft/min rope
• Voltage: 12V DC
• Amperage Draw: 100 A
• Gypsy Size: 3/8" chain gypsy
• Chain Compatibility: 3/8" short-link chain (10 mm)
• Rope Compatibility: 5/8" (16 mm) rope
• Motor Power: 1000W
• Material: Stainless steel and chromed bronze deck unit
• Recommended Boat Length: Typical boats to approximately 50 feet
• Circuit Breaker Size: 135 A
• Warranty: 3-years limited warranty
• Manual Override: Yes, via winch handle
• Control Options: Helm switch; optional foot switches/remote
• Weight: 47.2 pounds
• Package Dimensions: 20 x 17 x 12 inches

Frequently Asked Questions

What size chain and rope does the Maxwell RC101012V windlass handle? The Maxwell RC10 windlass (RC101012V) is designed for 3/8 inch (10 mm) short-link chain spliced to 5/8 inch (16 mm) three-strand or 8-plait rope.

Is the RC101012V a vertical or horizontal windlass? RC101012V is a vertical windlass, meaning the gypsy sits below deck and the motor/gearbox mounts vertically through a single deck penetration.

What is the maximum pulling power of this windlass? The RC101012V has an approximate maximum pull of 1870 lb, with a working load of 625 lb and a maximum load rating of 1870 lb.

How fast does the RC10 retrieve chain and rope? The Maxwell RC10 vertical windlass retrieves chain at approximately 79 ft/min and rope at approximately 65 ft/min.

What voltage and amperage does the RC101012V require? This windlass runs on 12V DC and draws approximately 100 A, with a 135 A circuit breaker specified for the installation.

What boat size is the Maxwell RC10 windlass suited for? The RC101012V is intended for boats up to approximately 50 feet in typical use.

What materials is the RC10 windlass made from? The RC101012V deck unit is built from marine-grade 316 stainless steel and chromed bronze for long-term durability in a marine environment.

What is included in the kit with the RC101012V? The RC10 windlass kit includes the windlass itself, a dual-direction solenoid pack, a circuit breaker/isolator panel, an up/down remote control panel, and an emergency crank/clutch release handle.

Does the RC101012V have a manual override for emergencies? Yes, the RC10 includes a manual override and free-fall function operated with the emergency crank/clutch release handle included in the kit.

How heavy is the Maxwell RC10 windlass? The RC101012V windlass weighs 47.2 pounds.

Can the RC101012V be serviced without full disassembly? Yes, the topworks of the RC10 can be fully disassembled for maintenance using only the handle provided and an Allen key, without removing the windlass from the deck.

Will the RC10 windlass work with an all-chain rode instead of rope/chain? Yes, the RC101012V works effectively with all-chain rodes in addition to the standard chain-to-rope combination.