Megaware Keelguard SkegGuard 27081 Stainless Steel Skeg Guard - Fits OMC Cobra, Evinrude, Suzuki Outboards

The Megaware Keelguard SkegGuard 27081 is a stainless steel skeg protector designed to shield an outboard motor's skeg from ramp dragging, submerged debris, and everyday wear on the water. It also serves as a repair option for a skeg that has already been damaged or broken, restoring function with as little as 2 to 3 inches of the original skeg remaining. The SkegGuard is built from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish, and it is engineered to conform closely to the shape of the skeg it is installed over. A drain hole at the bottom of the guard lets water escape after use, helping to prevent the trapped moisture that leads to corrosion or freeze damage in colder climates.

Installation is designed to be straightforward: using a rubber mallet, the SkegGuard is slid onto the existing skeg and tapped into place until fully seated, then secured through pre-drilled holes using a 1/4-inch drill bit. The full installation is intended to take under 10 minutes. A 3mm lower wear tab adds extra protection at the point of the skeg most likely to strike bottom. The SkegGuard 27081 is fitment-specific and is built for OMC Cobra, Evinrude, and Suzuki outboard models as listed below; it does not fit the 2023 225hp and 250hp STEALTH models. The product is backed by a 3-year warranty.

Specifications

• Brand: Megaware Keelguard
• Manufacturer Part Number: 27081
• Category: Skeg Guards
• Material: 316 Stainless Steel
• Gauge: 18 Gauge
• Finish: Mirror-Polished
• Color: Silver
• Item Dimensions (L x W x H): 1.25 x 9 x 20 inches
• Weight: 1.4 pounds
• Wear Tab Thickness: 3mm
• Drain Hole: Yes, prevents water collection and corrosion
• Installation Hardware Required: 1/4-inch drill bit (holes pre-drilled in guard)
• Minimum Remaining Skeg Length for Installation: 2 to 3 inches
• Warranty: 3-Year
• UPC: 672057270813
• Number of Items: 1

Fitment

• OMC Cobra 4 cylinder, 1990-1993
• OMC Cobra V6-V8, 1986-1996 (does not fit King Cobra)
• Evinrude 150-175-200HP 2 Stroke, 2006-2020
• Suzuki DF150 SS/AST, 2020-2022
• Suzuki DF200ATLRSS, ATLXSS, AST, 2020-2022 (does not fit 2023 STEALTH)
• Suzuki DF250SS, 2008-2022 (does not fit 2023 STEALTH)
• Suzuki DF300T, 2007-2011 (does not fit AP or B Model)
• Does not fit 2023 225hp or 250hp STEALTH models

Frequently Asked Questions

What does the Megaware Keelguard SkegGuard 27081 do? It fits over an outboard motor's skeg to protect it from ramp dragging, submerged debris, and general wear, and it can also restore function to a skeg that is already damaged or broken.

Which outboard motors does the SkegGuard 27081 fit? The SkegGuard 27081 fits OMC Cobra 4 cylinder models from 1990-1993, OMC Cobra V6-V8 models from 1986-1996 (excluding King Cobra), Evinrude 150-175-200HP 2 Stroke motors from 2006-2020, and specific Suzuki DF150, DF200, DF250, and DF300T models as listed in the fitment section.

Does the SkegGuard 27081 fit the 2023 Suzuki STEALTH models? No. The SkegGuard 27081 does not fit the 2023 225hp and 250hp STEALTH models, nor the 2023 STEALTH versions of the DF200 or DF250.

What material is the SkegGuard 27081 made from? It is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish.

How much of the original skeg needs to remain to install this guard? The SkegGuard 27081 can be installed with as little as 2 to 3 inches of the original skeg remaining, making it usable even after significant skeg damage.

How is the SkegGuard 27081 installed? Using a rubber mallet, the guard is slid onto the existing skeg and gently tapped until fully seated, then secured through its pre-drilled holes using a 1/4-inch drill bit. The process is designed to take under 10 minutes.

Does the SkegGuard 27081 include a drain hole? Yes, a drain hole at the bottom of the SkegGuard 27081 lets water escape to help prevent corrosion or freeze damage from trapped moisture.

How much does the SkegGuard 27081 weigh? The Megaware Keelguard SkegGuard 27081 weighs 1.4 pounds.

What are the dimensions of the SkegGuard 27081? The item measures 1.25 x 9 x 20 inches (length x width x height).

Is the SkegGuard 27081 covered by a warranty? Yes, the Megaware Keelguard SkegGuard 27081 comes with a 3-year warranty.

What color and finish does the SkegGuard 27081 have? It has a silver, mirror-polished stainless steel finish.

Can the SkegGuard 27081 be used as a skeg repair rather than just protection? Yes, in addition to preventing future damage, the SkegGuard 27081 restores function to a skeg that is already worn, damaged, or broken, provided 2 to 3 inches of the original skeg remain.