Megaware Keelguard SkegGuard 27181 Stainless Steel Skeg Protector for Force 85-150HP Outboards

The Megaware Keelguard SkegGuard 27181 is a stainless steel skeg protector designed to guard an outboard motor's skeg against ramp dragging, hidden debris, and everyday wear on the water. It is also used to restore function to a skeg that has already been damaged or broken, since installation requires as little as 2 to 3 inches of the original skeg remaining. The SkegGuard is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish that conforms to the shape of the skeg, and it includes a drain hole on the bottom to keep water from collecting and causing corrosion or freezing.

Installation is designed to take under 10 minutes in 4 steps: the SkegGuard is slid onto the existing skeg using a rubber mallet and gently tapped until fully seated, then the pre-drilled holes are used to drill the skeg with a 1/4-inch drill bit for a bolt-on fit. The unit features a 3mm lower wear tab to take the brunt of impact and dragging. SkegGuard 27181 fits Force outboards at 85, 90, 120, 125, and 150 HP model years 1988-1996, and Force 90, 120, and 150 HP 2 Stroke L Drive models years 1988-1991. It is backed by a 3-year warranty.

Specifications

• Brand: MEGAWARE KEELGUARD
• Manufacturer Part Number: 27181
• Material: 316 Stainless Steel
• Gauge: 18 gauge
• Finish: Mirror-polished
• Color: Silver
• Weight: 1.4 pounds
• Installation Type: Bolt-On
• Drill Bit Size Required: 1/4 inch
• Wear Tab Thickness: 3mm
• Minimum Remaining Skeg Length for Install: 2 to 3 inches
• Drain Hole: Yes
• Warranty: 3-year
• Unit Count: 1

Fitment

• Force 85, 90, 120, 125, 150 HP, 1988-1996
• Force 90, 120, 150 HP, 2 Stroke L Drive, 1988-1991

Frequently Asked Questions

What does the Megaware SkegGuard 27181 do? The SkegGuard 27181 is a stainless steel protector that slides over an outboard motor's skeg to guard it against ramp dragging, hidden debris, and everyday wear, and it can also restore function to a skeg that is already damaged or broken.

Which outboards does SkegGuard 27181 fit? SkegGuard 27181 fits Force 85, 90, 120, 125, and 150 HP outboards from 1988-1996, as well as Force 90, 120, and 150 HP 2 Stroke L Drive models from 1988-1991.

What material is the SkegGuard 27181 made from? It is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish that conforms to the shape of the skeg.

How much of the original skeg do I need left to install this? As little as 2 to 3 inches of the original skeg remaining is enough to attach and install the Megaware SkegGuard 27181.

How long does installation take? Installation of the 27181 SkegGuard takes under 10 minutes in 4 simple steps: sliding it onto the skeg with a rubber mallet, seating it, then drilling through the pre-drilled holes.

What size drill bit is needed for installation? A 1/4-inch drill bit is used to drill through the skeg using the pre-drilled holes on the SkegGuard 27181.

Does the SkegGuard have a drain hole? Yes, the 27181 SkegGuard includes a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing.

How much does the Megaware SkegGuard 27181 weigh? The Megaware SkegGuard 27181 weighs 1.4 pounds.

What is the wear tab thickness on this skeg protector? The SkegGuard 27181 features a 3mm lower wear tab designed to take the impact from ramp dragging and debris.

Is the SkegGuard 27181 bolt-on or does it require welding? It is a bolt-on installation; no welding is required, just drilling through the pre-drilled holes with a 1/4-inch bit.

What warranty comes with the Megaware SkegGuard 27181? The Megaware SkegGuard 27181 comes with a 3-year warranty.

Can the SkegGuard 27181 be used to fix an already broken skeg? Yes, the 27181 is also used for replacing or restoring function to a skeg that is damaged or broken, as long as 2 to 3 inches of the original skeg remain.