Moeller Thru-Hull Vent 035732-10, 90 Degree Elbow for 5/8 Inch Vent Hose, Fits Hulls up to 1/2 Inch Thick

The Moeller 035732-10 Thru-Hull Vent is a 90 degree elbow fitting designed to vent a boat's fuel system through the hull. It accommodates 5/8 inch vent hose and is built for hulls up to 1/2 inch thick, making it a straightforward fit for typical fiberglass and aluminum hull sections in that thickness range. The fitting is constructed of brass with a chrome plated finish, giving it corrosion resistance and a clean, finished appearance where it passes through the hull exterior.

This vent is intended for fuel systems produced prior to 2011 and is not intended for use in fuel systems produced in 2011. When replacing an existing thru-hull vent or building out a fuel tank venting run, the 90 degree elbow shape allows the hose to route with a clean bend at the hull penetration rather than requiring a separate elbow adapter. As with any fuel system component, it should be installed and sealed according to standard marine fuel system practice to maintain a proper vent path and prevent leaks at the hull.

Specifications

• Brand: Moeller
• Manufacturer Part Number: 035732-10
• Product Type: Thru-Hull Vent
• Style: 90 Degree Elbow
• Vent Hose Size: 5/8 inch
• Maximum Hull Thickness: 1/2 inch
• Fuel System Compatibility: For fuel systems produced prior to 2011
• Material: Brass
• Finish: Chrome plated
• Color: Silver
• Outside Diameter: 0.63 inches
• Nominal Wall Thickness: 0.5 inches
• Product Dimensions: 6.9 inches L x 1.7 inches W
• Weight: 0.1 pounds

Fitment

• For fuel systems produced prior to 2011 (not for use in fuel systems produced in 2011)
• Fits hulls up to 1/2 inch thick
• Accommodates 5/8 inch vent hose

Frequently Asked Questions

What is the Moeller 035732-10 used for? It is a thru-hull vent fitting that vents a boat's fuel system through the hull, using a 90 degree elbow to route 5/8 inch vent hose out through the hull wall.

What size vent hose does this fitting accommodate? The Moeller 035732-10 accommodates 5/8 inch vent hose.

How thick a hull will this vent fit? This thru-hull vent is designed for hulls up to 1/2 inch thick.

Will the 035732-10 work on a fuel system built in 2012? No. The 035732-10 is intended for fuel systems produced prior to 2011 and is not for use in fuel systems produced in 2011.

What material is the vent fitting made of? The 035732-10 thru-hull vent is made of brass with a chrome plated finish.

What is the outside diameter of the fitting? The outside diameter of the Moeller 035732-10 thru-hull vent is 0.63 inches, with a nominal wall thickness of 0.5 inches.

What are the overall dimensions of this part? The Moeller 035732-10 measures 6.9 inches in length by 1.7 inches in width.

How much does the thru-hull vent weigh? The 035732-10 weighs 0.1 pounds.

Is this fitting a straight or angled design? It is a 90 degree elbow, allowing the vent hose to make a clean bend at the hull penetration rather than needing a separate elbow adapter.

Is the 035732-10 an original Moeller part or an aftermarket copy? The 035732-10 is a genuine Moeller Marine part, not an aftermarket reproduction.

Can this vent be used for fuel tanks built after 2011? No, Moeller specifies this part is for fuel systems produced prior to 2011 and states it should not be used in fuel systems produced in 2011.