Moeller Tank Mounting Strips 035731-10, 2 in. X 30 in. Black Self-Adhesive Foam, Sold in Pair

The Moeller Tank Mounting Strips, part number 035731-10, are closed cell poly foam cushion strips designed to sit between a fuel tank and the hull. They protect the tank from vibration and abrasion while creating room for air circulation underneath, which helps prevent moisture from being trapped against the tank surface. Each strip is black and self-adhesive, so it presses directly onto the mounting surface without separate fasteners or adhesive products. The strips measure 2 inches wide by 30 inches long (50.8 mm by 762 mm), with a height of 35 mm, and are sold as a matched pair so both sides of a tank installation can be cushioned consistently. Closed cell foam construction resists water absorption, unlike open cell foams that can soak up moisture and hold it against the tank. This makes the 035731-10 strips suited for permanent fuel tank installations where the tank rests on a rigid mounting surface and needs a buffer layer to reduce chafing, rattling, and point-load contact. Installation is straightforward: clean and dry the mounting surface, peel the adhesive backing, and press the strip into place before setting the tank on top.

Specifications

• Brand: Moeller
• Manufacturer Part Number: 035731-10
• Product Name: Tank Mounting Strips
• Width: 2 inches (50.8 mm)
• Length: 30 inches (762 mm)
• Height: 35 mm
• Color: Black
• Material: Closed cell poly foam
• Mounting Type: Self-adhesive
• Quantity: Sold in a pair
• Weight: 0.1 pounds
• Application: Permanent fuel tank mounting

Fitment

Universal fit for permanent fuel tank installations; not specific to a single make, model, or engine.

Frequently Asked Questions

What are the Moeller Tank Mounting Strips 035731-10 used for? They are cushion strips that sit between a fuel tank and the hull, providing padding and room for air circulation around the tank.

How many strips come in a pack of 035731-10? The 035731-10 mounting strips are sold in a pair, giving you two strips per package.

What size are the Moeller 035731-10 mounting strips? Each strip measures 2 inches wide by 30 inches long (50.8 mm by 762 mm), with a height of 35 mm.

Are these mounting strips adhesive-backed? Yes, the 035731-10 strips are self-adhesive, so they press directly onto the mounting surface without needing separate glue or fasteners.

What material are the Moeller tank mounting strips made from? The 035731-10 strips are made of closed cell poly foam, which resists water absorption better than open cell foam.

What color are the 035731-10 tank mounting strips? They are black.

Do these strips fit any fuel tank? The Moeller 035731-10 mounting strips are a universal cushion strip intended to be cut or positioned to suit permanent fuel tank installations rather than a tank-specific fit.

How much do the 035731-10 mounting strips weigh? The pair weighs 0.1 pounds.

Why is there a gap for circulation under the fuel tank? The 035731-10 strips are designed to provide room for circulation between the tank and hull, which helps prevent moisture from becoming trapped against the tank surface.

How do I install the Moeller tank mounting strips? Clean and dry the mounting surface, peel the backing from the self-adhesive 035731-10 strip, press it into place, and then set the fuel tank on top of the cushioned strips.