Onyx A/M-33 All Clear Rearming Kit, 33 Gram CO2 Cylinder - Fits A/M-33 ALL CLEAR Automatic/Manual Inflatable Life Jackets

The Onyx A/M-33 All Clear Rearming Kit restores an Onyx A/M-33 ALL CLEAR automatic/manual inflatable life jacket to ready-to-use condition after it has been inflated. Inflatable life jackets are reusable, but the CO2 cylinder that powers the inflation is a single-use component and must be replaced before the jacket can be armed again. This kit supplies the correct replacement cylinder along with the water-soluble bobbin that triggers automatic inflation, so the jacket can be fully rearmed in one step.

The kit is built around a 33 gram CO2 cylinder with a 1/2 inch thread, sized specifically for the A/M-33 ALL CLEAR automatic/manual inflator mechanism. It also includes a water-soluble bobbin, the small disc that dissolves on contact with water to trigger automatic inflation, plus printed rearming instructions to guide the process step by step. Before heading out on the water, confirm the CO2 cylinder is the correct size for your inflator and has not been previously fired, and always follow your life jacket Owner's Manual for the proper arming procedure.

It is recommended to keep a spare rearming kit on hand, both to have a jacket ready immediately after use and to allow an owner to practice rearming and become familiar with the process before it is needed in an emergency.

Specifications

• Brand: Onyx
• Manufacturer Part Number: 136300-701-999-19
• Type: Flotation
• Kit Contents: 1 - 33 gram CO2 cylinder with 1/2 inch thread, 1 - Water soluble bobbin, Rearming instructions
• CO2 Cylinder Size: 33 gram
• CO2 Cylinder Thread: 1/2 inch
• Compatibility: A/M-33 ALL CLEAR automatic/manual inflatable life jackets
• Material: CO2 cylinder, water soluble bobbin
• Weight: 0.4 pounds
• UPC: 043311960465

Fitment

This rearming kit is designed for Onyx A/M-33 ALL CLEAR automatic/manual inflatable life jackets. Verify your life jacket model calls for a 33 gram CO2 cylinder with a 1/2 inch thread before ordering.

Frequently Asked Questions

What is included in the Onyx A/M-33 All Clear Rearming Kit? The kit includes one 33 gram CO2 cylinder with a 1/2 inch thread, one water-soluble bobbin, and printed rearming instructions.

Which life jackets does this rearming kit fit? The 136300-701-999-19 kit is sized for Onyx A/M-33 ALL CLEAR automatic/manual inflatable life jackets.

Can an inflatable life jacket be reused after it inflates? Yes, inflatable life jackets can be reused after each inflation, but the CO2 cylinder must be replaced before the jacket is used again, which is what this rearming kit provides.

What size CO2 cylinder does this kit use? It uses a 33 gram CO2 cylinder with a 1/2 inch thread.

Is the bobbin in this kit water-soluble? Yes, the included bobbin is a water-soluble bobbin that should be stored in a dry place until it is installed.

Should I buy a spare rearming kit? It is recommended to purchase an extra Onyx A/M-33 rearming kit so you can practice rearming your inflatable life jacket and become familiar with its operation before you need it on the water.

How do I know if my CO2 cylinder is still good? Before use, verify that the CO2 cylinder in your A/M-33 kit is the correct size and has not been previously fired.

Does this kit come with instructions? Yes, rearming instructions are included in the box, and you should also always follow your life jacket's Owner's Manual for the proper arming procedure.

What thread size is the CO2 cylinder in this kit? The CO2 cylinder included in the 136300-701-999-19 kit has a 1/2 inch thread.

Where should I store the bobbin before installing it? The water-soluble bobbin should be stored in a dry place to prevent it from dissolving prematurely.

Is this kit for automatic or manual inflation? This rearming kit is made for the A/M-33 ALL CLEAR automatic/manual inflatable life jacket.