Scanstrut ROKK Flip Pro SC-USB-F1 Dual USB-A/C Marine Fast Charger, 12/24V

The Scanstrut ROKK Flip Pro SC-USB-F1 is a dual-port USB-A/USB-C charging socket built for permanent installation on boats and other 12V/24V systems. It is designed to work directly with either a 12V or 24V input and delivers fast charging through both ports at once, so two devices such as phones, tablets, or handheld electronics can be topped up from the same unit. On a 24V system the USB-C port outputs up to 60W, while on a 12V system it delivers up to 36W; the USB-A port outputs up to 36W. A stainless steel spring-loaded cap flips closed over the ports when they are not in use, keeping water and spray out and giving the unit its IPX4 waterproof rating for washdown conditions. The housing is built from marine-grade materials with a UV-resistant finish, and the interior uses an anti-corrosion protective coating to stand up to the marine environment over time. The 316 stainless steel hinge and spring mechanism resist corrosion at the moving cap. The USB-A and USB-C ports offer a universal fit for standard charging cables, and Scanstrut recommends using the charge cable supplied with your device for the best charging performance. The unit is straightforward to install into a standard panel cutout on a helm, console, or cabin surface, giving boaters a permanent, weatherproof charging point wherever it is mounted.

Specifications

• Brand: Scanstrut
• Manufacturer Part Number: SC-USB-F1
• Input Voltage: 10-30V DC (12/24V System)
• Input Current (Maximum): 6A (10A fuse recommended)
• Standby Power Draw: 0.01W
• USB-C Output: 60W maximum on 24V system, 36W maximum on 12V system
• USB-A Output: 36W maximum
• Waterproof Rating: IPX4
• Connector Type: USB-A and USB-C, universal fit
• Material: Marine-grade materials with internal anti-corrosion coating; 316 stainless steel hinge and spring
• Weight: 0.14 pounds
• Product Dimensions: 3.5 x 2 x 2 inches
• UPC: 5060114797956

Frequently Asked Questions

Does the Scanstrut SC-USB-F1 work on both 12V and 24V boats? Yes, the ROKK Flip Pro SC-USB-F1 accepts an input voltage range of 10-30V DC, so it works directly on either a 12V or 24V system without any additional wiring or converters.

How fast does the ROKK Flip Pro charge devices? On a 24V system the USB-C port outputs up to 60W and the USB-A port up to 36W; on a 12V system the USB-C port outputs up to 36W and the USB-A port up to 36W, so the SC-USB-F1 supports fast charging on either voltage.

Can I charge two devices at the same time? Yes, the SC-USB-F1 has one USB-A port and one USB-C port that can be used simultaneously to charge two devices at once.

Is the Scanstrut SC-USB-F1 waterproof? The SC-USB-F1 carries an IPX4 waterproof rating, and its stainless steel spring-loaded cap closes over the ports when not in use to keep water out, making it washdown ready.

What materials is the ROKK Flip Pro charger made from? The SC-USB-F1 is built from marine-grade materials with a UV-resistant, anti-corrosion protective coating on the interior, and uses a 316 stainless steel hinge and spring for the cap mechanism.

What size fuse should I use with this charger? Scanstrut recommends a 10A fuse for the SC-USB-F1, which has a maximum input current draw of 6A.

What are the dimensions and weight of the SC-USB-F1? The Scanstrut ROKK Flip Pro SC-USB-F1 measures 3.5 x 2 x 2 inches and weighs 0.14 pounds.

Do I need a special cable to fast charge with the SC-USB-F1? The unit has universal USB-A and USB-C ports, but Scanstrut recommends using the charge cable that came with your device for optimal charging performance.

How much power does the SC-USB-F1 draw when not charging anything? The standby power draw of the SC-USB-F1 is less than 0.01W, so it uses minimal power when no device is plugged in.

How is the ROKK Flip Pro installed? The Scanstrut SC-USB-F1 is designed to be easy to install and wires directly into a 12V or 24V system, with the spring-loaded cap and stainless hinge built in for a finished, washdown-ready fit.