SeaStar Control Cable CC17016, 400 Series 16 Feet, Fits Pre-1979 OMC/Johnson/Evinrude with BRP/OMC Controls
SeaStar Control Cable CC17016, 400 Series 16 Feet, Fits Pre-1979 OMC/Johnson/Evinrude with BRP/OMC Controls
The SeaStar CC17016 is a 400 Series standard-type control cable assembly measuring 16 feet, engineered as an OEM direct-replacement for outboard engines built before 1979 that use OMC, Johnson, or Evinrude powerheads with BRP/OMC control heads. It uses the existing connection components on the control head, so it drops in without modifying the mounting hardware. The cable core is available in stainless or nylon covered wire construction with moisture protective seals at each end, paired with stainless steel terminals and brass conduit fittings to resist salt water, chemical, and corrosion exposure over the life of the cable. A black HDPE outer jacket wraps the full length of the cable, resisting abrasion and the effects of UV, gasoline, and oil, and the cable is lubricated for life at the factory so it will not need periodic greasing. It is built to an 8 inch minimum bend radius, which matters when routing the cable through tight helm and engine compartments. Every SeaStar control cable is environmentally tested for marine use and is designed to exceed the engine manufacturer's own cable specifications, meeting ABYC safety standards and ISO/IMCI/NMMA certification requirements. Before ordering, confirm 16 feet is the correct length for your steering run, since control cables are not adjustable after the fact. The CC17016 is made in the U.S.A. And is backed by a two-year recreational user warranty against manufacturing defects.
Specifications
- Brand: SeaStar
- Manufacturer Part Number: CC17016
- Type: 400 Series Control Cable Assembly (standard)
- Length: 16 feet
- Weight: 1.41 pounds
- Color: Black
- Outer Jacket: HDPE
- Terminals/Fittings: Stainless steel terminals, brass conduit fittings
- Core Wire: Stainless or nylon covered, with moisture protective seals
- Number of Wires: 2
- Minimum Bend Radius: 8 inches
- Country of Origin: Made in the U.S.A.
- Warranty: Two-year recreational user warranty against manufacturing defects
- UPC: 731957024350
Fitment
- Pre-1979 OMC/Johnson/Evinrude engines with BRP/OMC controls
Replaces (OEM)
- No OEM cross-reference numbers are listed for this part.
Frequently Asked Questions
What engines does the SeaStar CC17016 control cable fit? The CC17016 is designed for engines built before 1979, specifically OMC, Johnson, or Evinrude outboards that use BRP/OMC control heads.
How long is the CC17016 control cable? This SeaStar control cable is 16 feet long. Confirm 16 feet is the correct length for your steering run before ordering, since control cables cannot be shortened or lengthened after purchase.
Is the CC17016 an OEM replacement or an aftermarket cable? It is an OEM direct-replacement type cable, meaning the SeaStar CC17016 uses the same connection components as the original equipment cable on Pre-1979 OMC/Johnson/Evinrude engines with BRP/OMC controls.
What is the CC17016 control cable made of? The CC17016 uses stainless steel terminals and brass conduit fittings, a stainless or nylon covered core wire with moisture protective seals, and a black HDPE outer jacket.
How much does the CC17016 control cable weigh? The SeaStar CC17016 weighs 1.41 pounds.
Does the CC17016 need to be greased after installation? No, the CC17016 is lubricated for life at the factory, so it does not require periodic greasing like some other cable designs.
What is the minimum bend radius for the CC17016 cable? The SeaStar CC17016 has an 8 inch minimum bend radius, which should be accounted for when routing the cable through the helm and engine compartment.
What color is the CC17016 control cable? The CC17016 has a black HDPE outer jacket.
What is included when you order the CC17016? Ordering the CC17016 gets you one complete 400 Series control cable assembly, 16 feet in length, ready to install using the existing connection components on the control head.
Does the CC17016 meet marine safety standards? Yes, the CC17016 exceeds the engine manufacturer's specifications and meets ABYC safety standards along with ISO/IMCI/NMMA certification requirements.
What warranty comes with the CC17016 control cable? The SeaStar CC17016 is backed by a two-year recreational user warranty against manufacturing defects.
Where is the CC17016 control cable manufactured? The CC17016 is made in the U.S.A.