SeaStar CC21010 630 Type Control Cable, 10 Feet, Mariner/Mercury Controls (Pre-1993, 40 HP and Under)
SeaStar CC21010 630 Type Control Cable, 10 Feet, Mariner/Mercury Controls (Pre-1993, 40 HP and Under)
The SeaStar CC21010 is a 10-foot, 630-type standard control cable built for Mariner outboards (pre-1993, 40 HP and lower) equipped with Mariner/Mercury controls. It uses SeaStar's Universal-type design with a 10-32 threaded terminal and clamp-type fitting at each end, so it works with the existing connection components on compatible engine controls. Construction includes stainless steel terminals and conduit fittings plus stainless steel Lubri-Core wires with moisture protective seals, all wrapped in a heavy-duty HDPE outer jacket that resists abrasion, UV exposure, salt water, chemicals, gasoline, and oil. The cable is lubricated for life at the factory, has an 8 inch minimum bend radius, and provides 3 inches of end rod travel. It is manufactured in the U.S.A. And is environmentally tested for marine applications, and it exceeds the engine manufacturer's specifications while meeting ABYC, ISO/IMCI/NMMA certification requirements. This is the standard-grade version of the 630 type cable; buyers running longer or more complex cable routings can step up to SeaStar's XTREME premium version of this same cable for smoother feel. Before ordering, confirm this 10-foot length matches the run needed for your control station to helm/engine setup.
Specifications
- Brand: SeaStar
- Manufacturer Part Number: CC21010
- Product Series: 630 Type Control Cable (Standard)
- Length: 10 feet
- Color: Black
- Material: Nylon, Stainless Steel
- Number of Wires: 2
- Cable Strands: Multi Strand
- Cable End Fitting: 10-32 threaded terminal with clamp-type fitting
- End Rod Travel: 3 inches
- Minimum Bend Radius: 8 inches
- Weight: 0.6 pounds
- Country of Origin: Made in the U.S.A.
- UPC: 731957017123
Fitment
- Mariner (Pre-1993, 40 HP and lower) with Mariner/Mercury controls
Replaces (OEM)
- 032377-3-xxx
Frequently Asked Questions
What does the CC21010 control cable fit? The SeaStar CC21010 fits Mariner outboards from before 1993 rated 40 HP and lower that use Mariner/Mercury controls.
How long is the CC21010 cable? This SeaStar control cable measures 10 feet in length, as indicated by the CC21010 part number.
What OEM part number does the CC21010 replace? The CC21010 replaces SeaStar Solutions control cable part number 032377-3-xxx.
What are the cable ends and connection type? The CC21010 uses a 10-32 threaded terminal with a clamp-type fitting at each end, designed to work with existing connection components on compatible Mariner/Mercury controls.
What materials is the CC21010 made from? Construction includes stainless steel terminals, conduit fittings, and Lubri-Core wires with moisture protective seals, wrapped in a heavy-duty HDPE outer jacket.
How much does the CC21010 weigh? The CC21010 control cable weighs 0.6 pounds.
Is the CC21010 pre-lubricated? Yes, the CC21010 is lubricated at the factory for life, so no additional lubrication is needed at installation.
What is the minimum bend radius for this cable? An 8 inch minimum bend radius applies to the CC21010, which should be respected when routing the cable to avoid binding.
How much end rod travel does the CC21010 provide? 3 inches of end rod travel is provided by the CC21010 control cable.
Is there a premium version of the CC21010? Yes, SeaStar's CCX633xx is the premium XTREME version of this same 630 type cable, offering smoother movement with less lost motion for demanding installations.
Where is the CC21010 manufactured? The CC21010 control cable is made in the U.S.A.
Does the CC21010 meet marine safety standards? The CC21010 exceeds the engine manufacturer's specifications and meets ABYC safety standards along with ISO/IMCI/NMMA certification requirements.