SeaStar CC21013 Control Cable, Mariner 630 Type, 13 Feet - Fits Pre-1993 Mariner 40 HP and Less with Mariner/Mercury Controls

The SeaStar CC21013 is a 13-foot Mariner 630 type control cable built for pre-1993 Mariner outboards of 40 HP and less that use Mariner/Mercury controls. It uses a 10-32 threaded terminal and a clamp-type fitting at each end, so it works with the existing connection components on compatible aftermarket and Original Equipment Manufacturer control setups. The cable is engineered for both throttle and shift applications where a 630 type Mariner cable is called for.

Construction features stainless steel terminals and conduit fittings along with stainless steel Lubri-Core wires protected by moisture seals, giving the cable added corrosion protection and a longer service life. The core is lubricated for life inside a long-wearing HDPE liner for an ultra smooth feel at the helm. A heavy, red HDPE outer jacket resists abrasion and stands up to UV exposure, salt water, chemicals, gasoline, and oil. The cable has an 8 inch minimum bend radius and 3 inches of end rod travel, and it exceeds engine manufacturer specifications for control cable performance.

Each CC21013 cable is environmentally tested for marine applications and is made in the U.S.A. Before ordering, confirm that 13 feet is the correct length for your control run, since control cables must be ordered to the exact length needed for proper operation.

Specifications

• Brand: SeaStar
• Manufacturer Part Number: CC21013
• Series/Type: Mariner 630 Type (Standard)
• Length: 13 feet
• Color: Black
• Number of Wires: 2
• Terminal End: 10-32 Threaded
• Fitting Type: Clamp-Type
• Terminal and Fitting Material: Stainless Steel
• Core Wire: Stainless Steel Lubri-Core Wire with Moisture Protective Seals
• Outer Jacket: Heavy Red HDPE
• Minimum Bend Radius: 8 inches
• End Rod Travel: 3 inches
• Weight: 0.71 pounds
• Country of Origin: Made in the U.S.A.
• UPC: 731957001788

Fitment

• Pre-1993 Mariner outboards, 40 HP and less, with Mariner/Mercury controls

Frequently Asked Questions

What does the CC21013 control cable fit? The SeaStar CC21013 fits pre-1993 Mariner outboards rated 40 HP and less that use Mariner/Mercury controls, and it is built to the Mariner 630 type standard.

How long is the CC21013 cable? This SeaStar control cable measures 13 feet, matching the 13-foot designation in its CC21013 part number.

What type of terminal ends does this cable use? The CC21013 has a 10-32 threaded terminal and a clamp-type fitting at each end, allowing it to use the existing connection components on compatible controls.

Will this cable work with Original Equipment Manufacturer controls or only aftermarket ones? The CC21013 is designed to work with both aftermarket engine controls and Original Equipment Manufacturer units that accept a 10-32 threaded, Mariner 630 type control cable.

What materials are used in the CC21013 cable? Stainless steel terminals and conduit fittings are paired with stainless steel Lubri-Core wires and moisture protective seals, all enclosed in a heavy red HDPE outer jacket for corrosion and abrasion resistance.

How tight of a bend can this cable handle during installation? The CC21013 has an 8 inch minimum bend radius, which should be maintained when routing the cable through the boat to avoid binding or premature wear.

How much travel does the control end of the CC21013 cable have? The end rod on the CC21013 provides 3 inches of travel.

Is the CC21013 pre-lubricated? Yes, the SeaStar CC21013 is lubricated at the factory for life, so no additional lubrication of the core is required before installation.

Is the CC21013 tested for marine use? Yes, this SeaStar control cable is environmentally tested for marine applications and exceeds engine manufacturer specifications.

Where is the CC21013 control cable manufactured? The CC21013 is made in the U.S.A.

How many wires does the CC21013 cable have? The CC21013 is a 2-wire control cable.

What color is the CC21013 outer jacket? The outer jacket on the CC21013 is black.