SeaStar CC21018 18-Foot 630 Type Control Cable - Mariner Pre-1993 40 HP and Less with Mariner/Mercury Controls

The SeaStar CC21018 is an 18-foot, 630 type control cable built for Mariner outboards from before 1993 rated at 40 HP and less that use Mariner/Mercury controls. It uses a 10-32 threaded terminal with a clamp-type fitting at each end, so it works with the existing connection hardware on compatible control setups rather than requiring new mounting components.

Construction is centered on corrosion resistance and long service life. The cable core is stainless steel Lubri-Core wire with moisture protective seals, running through a long-wearing HDPE liner that is lubricated for life for smooth, low-friction operation. Terminals and conduit fittings are stainless steel. The outer jacket is a heavy HDPE material designed to resist abrasion and stand up to UV exposure, salt water, chemicals, gasoline, and oil. The cable has an 8 inch minimum bend radius and 3 inches of end rod travel, and is built to exceed the engine manufacturer's specifications.

This cable is intended as a direct-replacement type for Mariner/Mercury control applications and is manufactured in the U.S.A. Before ordering, confirm that 18 feet is the correct cable length for your application, since control cables must be sized precisely for proper operation.

Specifications

• Brand: SeaStar
• Manufacturer Part Number: CC21018
• Cable Length: 18 feet
• Type: 630 type control cable
• Fitment: Mariner (Pre-1993, 40 HP and less) with Mariner/Mercury controls
• Connector Type: 10-32 threaded terminal, clamp-type fitting
• Core Wire: Stainless steel Lubri-Core wire with moisture protective seals
• Terminal and Fitting Material: Stainless steel
• Outer Jacket: Heavy HDPE, abrasion, UV, salt water, chemical, gasoline, and oil resistant
• Minimum Bend Radius: 8 inches
• End Rod Travel: 3 inches
• Item Dimensions: 18 x 18 x 3 inches
• Weight: 1.97 pounds
• UPC: 731957000422
• Country of Origin: Made in the U.S.A.

Fitment

• Mariner (Pre-1993, 40 HP and less) with Mariner/Mercury controls

Replaces (OEM)

• 032377-3-xxx

Frequently Asked Questions

What engines does the SeaStar CC21018 control cable fit? The CC21018 fits Mariner outboards from before 1993 rated at 40 HP and less that use Mariner/Mercury controls.

How long is the CC21018 control cable? This control cable, part number CC21018, is 18 feet long.

What type of connector does this cable use? The CC21018 uses a 10-32 threaded terminal with a clamp-type fitting at each end, matching the existing connection hardware on compatible Mariner/Mercury control setups.

Does the CC21018 replace an existing SeaStar cable number? Yes, this 630 type cable replaces SeaStar Solutions control cable part number 032377-3-xxx.

What is the CC21018 cable made from? It uses stainless steel Lubri-Core wire with moisture protective seals inside a long-wearing HDPE liner, with stainless steel terminals and conduit fittings, and a heavy HDPE outer jacket.

How much does the CC21018 weigh? The SeaStar CC21018 control cable weighs 1.97 pounds.

Is the CC21018 resistant to weather and chemical exposure? Yes, its heavy HDPE outer jacket resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.

What is the minimum bend radius for this cable? The CC21018 has an 8 inch minimum bend radius.

How much end rod travel does the CC21018 provide? This cable provides 3 inches of end rod travel.

Is the CC21018 pre-lubricated? Yes, the HDPE liner on the CC21018 is lubricated for life at the factory.

Where is the CC21018 control cable manufactured? The SeaStar CC21018 control cable is made in the U.S.A.

How do I know if 18 feet is the right length for my application? Before ordering the CC21018, measure your existing control cable run to confirm 18 feet is the correct length, since control cables must match the application precisely for proper operation.