SeaStar CCX63312 TFXtreme 3300/33C Control Cable, 12 Feet, for Dual Station Boats

The SeaStar CCX63312 is a 12-foot TFXtreme 3300/33C control cable engineered for dual function mechanical engine controls, including dual station boat setups. It is built to work with side mount controls in dual station applications, and SeaStar recommends this 33C cable specifically for use with its DS (dual station) selector unit -- with a single station selector serving either a single engine or dual station boat, letting the operator switch stations simply by placing both levers in neutral and turning the selector switch. Note that this cable is set up for pull-only throttle operation; a push throttle application requires the outboard DS throttle unit instead.

Beyond DS applications, the cable uses a universal 10-32 threaded terminal with a clamp-type fitting at each end, so it is compatible with aftermarket engine controls as well as OEM units that accept this standard connection, including foot throttle setups on performance and bass boats and installations with complex or long cable runs. It is built around a patented splined core: ridges on the core keep a close fit with the cable's inner liner for smooth movement with minimal lost motion. A 0.34 inch super tough HDPE jacket resists abrasion and withstands UV, salt water, chemicals, gasoline, and oil, while 0.033 inch oil tempered lay wires add strength. The cable is lubricated for life at the factory and made in the U.S.A.

Specifications

• Brand: SeaStar
• Manufacturer Part Number: CCX63312
• Cable Series: 3300 TFXtreme (33C)
• Length: 12 feet
• Terminal Type: 10-32 threaded terminal with clamp-type fitting at each end
• Minimum Bend Radius: 4 inches
• Jacket Material: HDPE, 0.34 inch thick
• Core Wire: Oil tempered lay wires, 0.033 inch, with splined coated core
• Color: Black
• Weight: 1.73 pounds
• Throttle Operation: Pull only
• Country of Origin: Made in the U.S.A.
• Compatible Devices: Marine engine controls accepting universal 10-32 threaded cable ends

Frequently Asked Questions

How long is the SeaStar CCX63312 control cable? The CCX63312 is 12 feet long, part of SeaStar's 3300 TFXtreme (33C) control cable series.

Is this cable a push or pull throttle cable? The CCX63312 is set up as a pull-only throttle cable. If a push throttle setup is needed, SeaStar makes a separate outboard DS throttle unit for that application.

Can the CCX63312 be used in a dual station boat? Yes, SeaStar recommends this 33C cable for use with its DS (dual station) selector unit, allowing dual function mechanical controls and side mount controls to be used in a dual station boat with a single station selector.

What type of cable end does the CCX63312 have? It has a 10-32 threaded terminal with a clamp-type fitting at each end, matching the universal connection used by SeaStar and other engine controls that accept this thread standard.

What is the minimum bend radius of this cable? The CCX63312 has a 4 inch minimum bend radius, tighter than the 8 inch minimum bend radius of standard control cables, which helps with complex or long cable runs.

What material is the outer jacket made of? The cable jacket is 0.34 inch thick HDPE (high-density polyethylene), chosen to resist abrasion and withstand UV exposure, salt water, chemicals, gasoline, and oil.

Does the CCX63312 work with aftermarket engine controls? Yes, the CCX63312 is designed to fit aftermarket engine controls as well as OEM units that accept universal 10-32 threaded cable ends, including foot throttle applications on performance and bass boats.

How much does this control cable weigh? The SeaStar CCX63312 weighs 1.73 pounds.

Is the cable pre-lubricated? Yes, the CCX63312 is lubricated for life at the factory, and the HDPE liner is designed to stay ultra smooth over the life of the cable.

Where is the CCX63312 control cable made? The CCX63312 is made in the U.S.A.

What color is the CCX63312? The CCX63312 has a black outer jacket.