SeaStar CCX20510 TFXtreme Control Cable, 10 Feet, for BRP/OMC/Evinrude/Johnson Engine Controls

The SeaStar CCX20510 is a 10-foot XTREME control cable assembly built as a drop-in replacement for original equipment BRP/OMC/Johnson/Evinrude/Gale outboard control cables. It uses the existing connection components on the boat, so no modification to the control head or engine end is required during installation. The cable is built around SeaStar's patented Splined Core, where ridges on the core provide a close fit with the cable's inner liner for smooth movement and minimal lost motion at the helm.

This XTREME cable has a 4 inch minimum bend radius, compared to an 8 inch minimum bend radius on standard control cables, making it well suited to complex or long cable runs and to foot throttle applications on performance and bass boats. The outer jacket is a 0.34 inch thick, super tough HDPE material that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil. Inside, 0.033 inch oil-tempered lay wires provide strength, and the core wires carry moisture-protective seals with a stainless steel or nylon covering for corrosion resistance. Stainless steel terminals and brass fittings are used at the connection points for further corrosion protection. The cable is lubricated for life at the factory and is made in the U.S.A.

The CCX20510 fits BRP/OMC/Johnson/Evinrude/Gale outboards that use BRP/OMC style engine controls. Buyers should verify the correct cable length for their application before ordering.

Specifications

• Brand: SeaStar
• Manufacturer Part Number: CCX20510
• Product Type: Control cable assembly
• Cable Length: 10 feet
• Jacket Material: HDPE (High-Density Polyethylene), 0.34 inch thick
• Core Wire: 0.033 inch oil-tempered lay wires; stainless steel or nylon-covered core wires with moisture-protective seals
• Minimum Bend Radius: 4 inches (XTREME technology)
• Terminals/Fittings: Stainless steel terminals, brass fittings
• Color: Black
• Weight: 1.73 pounds
• Country of Origin: Made in U.S.A.
• Compatible Controls: BRP/OMC style controls
• UPC: 808282272968

Fitment

• BRP/OMC/Johnson/Evinrude/Gale outboards using BRP/OMC engine controls

Replaces (OEM)

• Direct drop-in replacement using existing OEM connection components; specific OEM cross-reference numbers are not published for this cable

Frequently Asked Questions

What is the SeaStar CCX20510 used for? The CCX20510 is a 10-foot control cable assembly used to connect a boat's helm controls to the outboard engine's throttle or shift linkage, replacing the original equipment cable on BRP/OMC/Johnson/Evinrude/Gale outboards.

How long is the CCX20510 control cable? The CCX20510 measures 10 feet, and buyers should verify this is the correct length for their control run before ordering, since control cables are not field-adjustable in length.

Will the CCX20510 fit Mercury or Volvo engine controls? No. The CCX20510 is built for BRP/OMC/Johnson/Evinrude/Gale outboards using BRP/OMC style engine controls; Mercury and Volvo control systems use different SeaStar cable part numbers with different engine-end connections.

What is the minimum bend radius of the CCX20510? The CCX20510 uses SeaStar's XTREME cable technology, which has a 4 inch minimum bend radius, compared to an 8 inch minimum bend radius for standard control cables, making it suitable for tight or complex cable routing.

What material is the CCX20510 jacket made of? The outer jacket on the CCX20510 is a 0.34 inch thick, super tough HDPE (High-Density Polyethylene) material designed to resist abrasion and withstand UV exposure, salt water, chemicals, gasoline, and oil.

Do I need to replace any other components to install the CCX20510? No. The CCX20510 is a drop-in replacement engineered to use the existing OEM connection components at both the control head and engine end, so no additional hardware is required.

Is the CCX20510 pre-lubricated? Yes, the CCX20510 is lubricated at the factory for life, and the HDPE liner is designed to stay ultra smooth without additional maintenance lubrication.

What is the weight of the CCX20510 control cable? The SeaStar CCX20510 weighs 1.73 pounds.

Is the CCX20510 suitable for foot throttle applications? Yes, the tight 4 inch bend radius of the CCX20510 XTREME cable makes it well suited for foot throttle setups on performance and bass boats, as well as for long or complex cable runs.

Where is the CCX20510 manufactured? The SeaStar CCX20510 control cable is made in the U.S.A.

What color is the CCX20510 cable? The CCX20510 has a black outer jacket.

Does the CCX20510 come with corrosion protection? Yes, the CCX20510 uses stainless steel terminals and brass fittings, along with moisture-protective seals on the core wires, to resist corrosion in marine environments.