SeaStar Control Cable CCX20532, 32 Feet, Mercury (1965-Date) and Force (1993-Date) Engines

The SeaStar CCX20532 is a 32-foot control cable engineered as a direct replacement for original equipment control cables on applicable outboard installations. It uses SeaStar's XTREME Technology, which incorporates a splined core with ridges that keep a close fit against the cable's inner liner, giving smooth, low-friction movement with minimal lost motion at the helm. The cable is built for controls that accept 10-32 threaded ends or for most Mercury products (1965-date) and Force products (1993-date) using aftermarket controls, and it terminates with a Mercury style engine end connection.

Construction features a 0.34 inch Super Tough HDPE outer jacket that resists abrasion and stands up to UV exposure, salt water, chemicals, gasoline, and oil, along with 0.033 inch oil tempered lay wires for strength and consistent performance under load. Stainless steel terminals and brass fittings add corrosion resistance at the connection points, and the HDPE liner is lubricated for life at the factory, so the cable arrives ready to install without additional greasing. The XTREME core design also gives this cable a 4 inch minimum bend radius, tighter than the 8 inch minimum bend radius typical of standard control cables, which is useful for tight or complex cable routing. Before ordering, confirm this 32-foot length matches the run required for your installation, since control cables must be replaced with the correct length to function properly.

Specifications

• Brand: SeaStar
• Manufacturer Part Number: CCX20532
• Cable Length: 32 feet
• Product Type: Control Cable
• Engine End Connection: Mercury style engine end connection
• Control End Compatibility: Controls accepting 10-32 threaded ends, or most Mercury products (1965-date) and Force products (1993-date) using aftermarket controls
• Jacket Material: 0.34 inch Super Tough HDPE jacket
• Core Wire: 0.033 inch oil tempered lay wires
• Terminals: Stainless steel
• Fittings: Brass
• Minimum Bend Radius: 4 inches
• Weight: 4.11 pounds
• Package Dimensions: 17 x 17 x 2.25 inches
• Country of Origin: Made in the U.S.A.

Fitment

• Most Mercury products (1965-date)
• Force products (1993-date) using aftermarket controls
• Controls which accept 10-32 threaded ends

Frequently Asked Questions

What engines does the SeaStar CCX20532 control cable fit? The CCX20532 is built for controls that accept 10-32 threaded ends, or for most Mercury products (1965-date) and Force products (1993-date) when used with aftermarket controls, and it uses a Mercury style engine end connection.

How long is the CCX20532 control cable? This SeaStar control cable measures 32 feet, matching the -32 in its part number CCX20532. Confirm your existing cable run length before ordering, since control cables must match the correct length for proper operation.

What is the minimum bend radius of this cable? The CCX20532 has a 4 inch minimum bend radius, tighter than the 8 inch minimum bend radius of standard control cables, which helps with complex or tight cable routing.

What is the outer jacket made of? The CCX20532 uses a 0.34 inch Super Tough HDPE jacket that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.

Does this cable come pre-lubricated? Yes, the SeaStar CCX20532 is lubricated for life at the factory, so it is ready to install without additional greasing of the liner.

What connection does the engine end use? The engine end of the CCX20532 uses a Mercury style engine end connection.

What are the terminals and fittings made of? The CCX20532 has stainless steel terminals and brass fittings, which add corrosion resistance at the cable's connection points.

How does this compare to a standard control cable? Compared to a standard control cable's 8 inch minimum bend radius, the CCX20532 offers a tighter 4 inch minimum bend radius along with oil tempered lay wires for added strength.

How much does the CCX20532 weigh? The SeaStar CCX20532 weighs 4.11 pounds.

What core wire construction does this cable use? The CCX20532 uses 0.033 inch oil tempered lay wires for strength and consistent performance.

Where is the CCX20532 control cable made? The SeaStar CCX20532 is made in the U.S.A.

Can the CCX20532 be used with aftermarket controls? Yes, the CCX20532 is designed for controls accepting 10-32 threaded ends or for Force products (1993-date) using aftermarket controls.