SeaStar CCX63306 3300 TFXtreme Control Cable, 6 Feet, Universal 10-32 Threaded Ends

The SeaStar CCX63306 is a 6-foot 3300/33C TFXtreme control cable built for dual-function mechanical engine controls, including foot throttle setups on performance and bass boats and installations with complex or long cable runs. It uses SeaStar's patented XTREME splined core, which incorporates ridges that create a close fit with the cable's inner liner for easy movement and minimal lost motion. The cable terminates in a universal 10-32 threaded terminal with a clamp-type fitting at each end, so it works with the existing connection components on controls that accept this universal cable-end type.

Construction includes a 0.34 inch super tough HDPE jacket that resists abrasion and withstands UV, salt water, chemicals, gasoline, and oil, along with 0.033 inch oil tempered lay wires for strength and performance. Terminals and conduit fittings are stainless steel for added corrosion protection, and the cable is lubricated for life at the factory. It is designed to fit aftermarket engine controls as well as OEM units from BMW, Chrysler, Honda, Nissan, Suzuki, Volvo, Yamaha, Tohatsu, and many inboard applications, and will also fit Evinrude, Johnson, OMC, and Mercury engines when used with the correct engine adapter kit. SeaStar recommends this 33C cable (CCX633XX series) for use with DS dual-station control units, where it allows a dual-function mechanical control to be used in a dual-station boat with a single station selector. This particular cable is a pull-only setup; a push-throttle DS unit requires the outboard DS throttle unit instead. Made in the U.S.A.

Specifications

• Brand: SeaStar
• Manufacturer Part Number: CCX63306
• Cable Length: 6 feet
• Cable Type: 3300/33C Universal
• Core Technology: XTREME splined core
• Terminal Type: 10-32 threaded terminal with clamp-type fitting
• Minimum Bend Radius: 4 inches
• Jacket Material: 0.34 inch HDPE
• Lay Wire Diameter: 0.033 inch, oil tempered
• Terminal/Fitting Material: Stainless steel
• Color: Black
• Material: Metal
• Item Dimensions: 17 x 1.5 x 17 inches
• Weight: 1.09 pounds
• Country of Origin: Made in U.S.A.

Fitment

Designed to fit aftermarket engine controls and OEM units that accept a universal 10-32 threaded cable end, including BMW, Chrysler, Honda, Nissan, Suzuki, Volvo, Yamaha, Tohatsu, and many inboard applications. Also fits Evinrude, Johnson, OMC, and Mercury engines with the correct engine adapter kit. Recommended for use as the 33C control cable with SeaStar DS dual-station control units; this is a pull-only cable.

Frequently Asked Questions

What is the SeaStar CCX63306 control cable used for? The CCX63306 is a 6-foot 3300/33C TFXtreme control cable used with dual-function mechanical engine controls, including foot throttle applications on performance and bass boats and setups with complex or long cable runs.

How long is the CCX63306 cable? This cable measures 6 feet in length, part of the 3300/33C TFXtreme control cable lineup identified by the CCX633XX part number series.

Will this cable fit my outboard engine controls? Yes, the CCX63306 is designed to fit aftermarket engine controls as well as OEM units that accept a universal 10-32 threaded cable end, including BMW, Chrysler, Honda, Nissan, Suzuki, Volvo, Yamaha, Tohatsu, and many inboard applications.

Does the CCX63306 work with Mercury, Evinrude, Johnson, or OMC engines? It will fit Evinrude, Johnson, OMC, and Mercury engines when paired with the correct engine adapter kit, since those engines require an adapter to use this universal-type cable.

Is this a push or pull throttle cable? The CCX63306 is a pull-only setup. If a push throttle configuration is needed for a DS dual-station unit, the outboard DS throttle unit should be used instead.

What terminal type does the CCX63306 use? It has a 10-32 threaded terminal with a clamp-type fitting at each end, allowing it to use the existing connection components on compatible controls.

How does the bend radius compare to a standard control cable? The CCX63306 has a 4 inch minimum bend radius, compared to an 8 inch minimum bend radius for standard control cables, making it better suited to tight or complex cable runs.

What is the outer jacket made of? The cable jacket is a 0.34 inch super tough HDPE material that resists abrasion and withstands UV exposure, salt water, chemicals, gasoline, and oil.

Does the CCX63306 come pre-lubricated? Yes, the cable is lubricated for life at the factory, so no additional lubrication is needed at installation.

Can this cable be used in a dual-station boat setup? Yes, SeaStar recommends this 33C cable for use with DS dual-station control units, which allows a single station selector to control a dual-function mechanical control across both stations.

What is the CCX63306 made of and what color is it? The CCX63306 is black in color with a metal core construction, stainless steel terminals and conduit fittings, and an HDPE outer jacket.

What are the dimensions and weight of the CCX63306? The item measures 17 x 1.5 x 17 inches and weighs 1.09 pounds.