T-H Marine Atlas AHJ-10V Hydraulic Jack Plate, 10 Inch Setback, Up to 300 HP / 625 lb Dry Weight

The T-H Marine Atlas Series AHJ-10V hydraulic jack plate is a 10 inch setback jack plate engineered for outboard-powered boats running engines up to 300 hp or up to 625 pounds of dry weight. It uses a self-contained hydraulic pump system, so there is no separate reservoir or hydraulic lines to install, and the actuator is made in the U.S.A. The Atlas design lifts the outboard from the bottom of its travel to the top in less than 8 seconds, giving boaters fast, on-the-water height adjustment for running trim and shallow-water access. Stroke length is 5 inches, with up to 7 inches of total height adjustment.

Instead of steel lifting rods, the AHJ-10V uses hi-tech engineered polymer rods that are stated to be 6 times more abrasion resistant than steel and are made from a self-lubricating material, eliminating the need for regular grease maintenance. The pump uses an easy two-pin removal design for quick field maintenance, and installation is designed to take about half the time of comparable jack plates. The transom side of the plate measures 16 3/8 inches wide by 12 1/2 inches tall, and the unit is predrilled for Power-Pole and Minn-Kota Talon shallow water anchor bracket mounting. The AHJ-10V ships with a relay harness and rocker switch for control wiring; mounting bolts are not included and should be sourced separately.

Specifications

• Brand: T-H Marine
• Manufacturer Part Number: AHJ-10V
• Product Line: Atlas Series Hydraulic Jack Plate
• Setback: 10 inches
• Maximum Engine Rating: 300 hp
• Maximum Dry Weight Capacity: 625 pounds
• Transom Side Dimensions: 16 3/8 inches wide x 12 1/2 inches tall
• Stroke Length: 5 inches
• Height Adjustment: Up to 7 inches
• Lift Speed: Bottom to top in less than 8 seconds
• Lift Rod Material: Hi-Tech Engineered Polymer, self-lubricating
• Material: Plastic
• Overall Dimensions: 20.5 x 18.25 x 11.75 inches
• Weight: 69.4 pounds
• Bracket Mounting Compatibility: Predrilled for Power-Pole and Minn-Kota Talon brackets
• Mounting Hardware: Not included
• Included Components: Relay harness and rocker switch
• UPC: 733572069556
• Model Number: 3002.1082

Frequently Asked Questions

What engines is the T-H Marine AHJ-10V Atlas jack plate rated for? The AHJ-10V Atlas hydraulic jack plate is rated for outboard engines up to 300 hp or up to 625 pounds of dry weight.

How much setback does the AHJ-10V provide? The AHJ-10V provides 10 inches of setback; the Atlas Series is also available in 4, 6, 8, 12, and 14 inch setback models.

How fast does the Atlas jack plate lift the engine? Less than 8 seconds is the stated time for the AHJ-10V to lift an outboard from the bottom of its travel to the top.

Does the AHJ-10V come with mounting bolts? No, mounting bolts are not included with the AHJ-10V Atlas hydraulic jack plate and must be sourced separately.

What is included with the AHJ-10V jack plate? The AHJ-10V ships with a relay harness and rocker switch for controlling the hydraulic pump.

What are the transom-side dimensions of the AHJ-10V? The transom side of the AHJ-10V Atlas jack plate measures 16 3/8 inches wide by 12 1/2 inches tall.

How much does the AHJ-10V weigh? The AHJ-10V Atlas hydraulic jack plate weighs 69.4 pounds.

What is the height adjustment range on the AHJ-10V? Up to 7 inches of height adjustment is available, with a stroke length of 5 inches.

Is the AHJ-10V compatible with shallow water anchors like Power-Pole? Yes, the AHJ-10V Atlas jack plate is predrilled for Power-Pole and Minn-Kota Talon bracket mounting.

What are the lift rods on the AHJ-10V made from? Hi-tech engineered polymer rods are used on the AHJ-10V, stated to be 6 times more abrasion resistant than steel.

Does the AHJ-10V require regular grease lubrication? No, the AHJ-10V's lift rods are made from a self-lubricating material, so regular grease lubrication is not required.

What is the difference between the standard AHJ-10V and the HD Atlas jack plate? The standard AHJ-10V is rated up to 300 hp, while the HD (Heavy Duty) version of the Atlas jack plate is rated for engines up to 400 hp.