T-H Marine Atlas Hydraulic Jack Plate, 12 Inch Setback, AHJ-12V, Rated Up To 300 HP

The T-H Marine Atlas Hydraulic Jack Plate (AHJ-12V) is a 12 inch setback hydraulic jack plate built for outboard motors up to 300 hp or up to 625 pounds dry weight. It uses a self-contained hydraulic pump system, so there is no separate reservoir or hydraulic lines to install, and it can raise the heaviest outboard from bottom to top in less than 8 seconds. Lifting is handled by a rod-and-slot design using high-tech engineered polymer rods that are rated 6 times more abrasion resistant than steel rods and are made from a self-lubricating material, so no regular grease lubrication is required. The hydraulic actuator is made in the U.S.A. And is designed for easy two-pin pump removal, so field maintenance and pump replacement can be done quickly without removing the whole plate. Stroke length is 5 inches with height adjustment of up to 7 inches. The transom side of the plate measures 16 3/8 inches wide by 12 1/2 inches tall. The plate is predrilled for Power-Pole and Minn-Kota Talon shallow water anchor bracket mounting. It ships with a relay harness and rocker switch; mounting bolts are not included. Some units are made to order, which can add lead time before shipment.

Specifications

• Brand: T-H Marine
• Manufacturer Part Number: AHJ-12V
• Setback: 12 inches
• Maximum Engine Horsepower: 300 HP
• Maximum Engine Dry Weight: 625 pounds
• Transom Mounting Plate Dimensions: 16 3/8 inches wide x 12 1/2 inches tall
• Stroke Length: 5 inches
• Height Adjustment: Up to 7 inches
• Weight: 70.8 pounds
• Item Dimensions: 20.5 x 18 x 13.5 inches
• Material: High-tech engineered polymer (lifting rods)
• UPC: 733572069600
• Included Components: Relay harness and rocker switch
• Mounting Bolts: Not included
• Predrilled Accessory Mounting: Power-Pole and Minn-Kota Talon bracket mounting

Fitment

• Standard-version outboards up to 300 HP or up to 625 pounds dry weight

Frequently Asked Questions

What is the setback on the T-H Marine AHJ-12V jack plate? The AHJ-12V is the 12 inch setback version of T-H Marine's Atlas hydraulic jack plate, part of a lineup also offered in 4, 6, 8, 10, and 14 inch setback sizes.

What size outboard motor can this jack plate handle? This standard version of the Atlas hydraulic jack plate is rated for outboards up to 300 hp or up to 625 pounds of dry weight; a Heavy Duty version handles engines up to 400 hp.

How fast does the AHJ-12V lift an outboard? The Atlas AHJ-12V uses a self-contained hydraulic pump that can raise the heaviest rated outboard from bottom to top in less than 8 seconds.

Are mounting bolts included with the AHJ-12V jack plate? No, mounting bolts are not included with the T-H Marine AHJ-12V and must be sourced separately based on the boat's transom.

Does the AHJ-12V need a separate hydraulic reservoir or lines? No. The AHJ-12V has a self-contained hydraulic pump system, so no external reservoir or hydraulic lines need to be installed.

What is the transom-side size of this jack plate? On the AHJ-12V, the transom side of the Atlas plate measures 16 3/8 inches wide by 12 1/2 inches tall.

How much does the AHJ-12V jack plate weigh? The T-H Marine AHJ-12V weighs 70.8 pounds.

Does the lifting mechanism require regular grease? No grease is required. The AHJ-12V's lifting rods are made from a self-lubricating engineered polymer material rated 6 times more abrasion resistant than steel rods.

Can this jack plate be used with a Power-Pole or Minn-Kota Talon shallow water anchor? Yes, the AHJ-12V is predrilled for both Power-Pole and Minn-Kota Talon bracket mounting.

What comes included with the AHJ-12V jack plate? The AHJ-12V ships with a relay harness and rocker switch for operating the hydraulic actuator; mounting bolts are not included.

How much height adjustment does the AHJ-12V provide? The Atlas AHJ-12V provides up to 7 inches of height adjustment with a 5 inch stroke length.

Is the AHJ-12V always in stock? Some Atlas jack plates, including certain configurations of the AHJ-12V, are made to order and can take 4 to 6 weeks for stock to become available.