T-H Marine CC-2 White Bulkhead Thru-Hull Fitting, 3/4 Inch Hole, 1/4 Inch Slot

The T-H Marine CC-2 is a self-attaching bulkhead thru-hull fitting designed to pass wires, such as transducer cables, cleanly through a boat's hull or bulkhead while sealing the opening. The fitting installs into a 3/4 inch hole and includes a 1/4 inch slot to allow a wire to be routed through without needing to disconnect a connector on the end of the cable. It is self-attaching and requires no additional hardware to install, and a turn down washer is included as part of the fitting to help secure and finish the installation from the opposite side of the bulkhead. This design makes the CC-2 a convenient solution for running transducer wires or similar cabling through a wall, transom, or bulkhead without drilling an oversized hole or cutting the wire's connector.

The CC-2 is finished in white, making it a clean, low-visibility option for light-colored hulls, decks, and interior surfaces. Its compact package footprint of 4.72 x 3.94 x 1.38 inches keeps it easy to store as a spare, and at 0.2 pounds it adds negligible weight to any installation. Boat owners running a transducer, sensor cable, or similar wire through a bulkhead where the connector cannot pass through a standard hole will find the slotted design of the CC-2 particularly useful.

Specifications

• Brand: T-H Marine
• Manufacturer Part Number: CC-2
• Color: White
• Hole Diameter: 3/4 inch
• Slot Diameter: 1/4 inch
• Package Dimensions: 4.72 x 3.94 x 1.38 inches
• Weight: 0.2 pounds
• Installation: Self-attaching, no additional hardware needed
• Included Hardware: Turn down washer
• Recommended Use: Transducer wire pass-through

Frequently Asked Questions

What is the T-H Marine CC-2 used for? The CC-2 is a bulkhead thru-hull fitting used to pass a wire, such as a transducer cable, through a boat's hull or bulkhead while sealing the opening around it.

What size hole does the CC-2 require? The T-H Marine CC-2 fits a 3/4 inch hole.

How wide is the wire slot on the CC-2? The slot on the CC-2 fitting is 1/4 inch in diameter, sized to let a wire pass through without removing its connector.

Do I need extra hardware to install the CC-2? No, the CC-2 is self-attaching and does not require additional hardware to install.

Does the CC-2 come with a washer? Yes, a turn down washer is included with the T-H Marine CC-2 to help finish and secure the installation.

What color is the CC-2 fitting? The CC-2 bulkhead thru-hull fitting is finished in white.

How much does the CC-2 weigh? The T-H Marine CC-2 weighs 0.2 pounds.

Can I run a transducer wire with a connector already attached through the CC-2? Yes, the slotted design of the CC-2 allows a wire to be routed through the fitting without needing to disconnect a connector on the end of the cable.

What are the package dimensions of the CC-2? The CC-2 ships in packaging measuring 4.72 x 3.94 x 1.38 inches.

Is the T-H Marine CC-2 genuine T-H Marine hardware? Yes, the CC-2 is a genuine T-H Marine part, manufactured and branded by T-H Marine.