T-H Marine G-Force Eliminator Prop Nut GFEL-MKS-BK, Black, for Standard Minn Kota Trolling Motors

The T-H Marine G-Force Eliminator Prop Nut (GFEL-MKS-BK) replaces the factory prop nut and washer on standard Minn Kota trolling motors to reduce prop noise and vibration while improving cooling. Machined from 6061 billet aluminum and finished with an anodized protective coating, the Eliminator provides a wider contact area than a stock nut, stabilizing the prop for a smoother, quieter ride. A durometer O-ring seated in the nut dampens noise and vibration and helps secure the nut in place, while built-in cooling ports act as a heat sink, drawing heat away from the motor to help extend battery and trolling motor life.

Installation requires no tools: simply remove the factory nut and washer (and the anode, if your motor has one) before threading on the Eliminator. It is designed to fit most Minn Kota and Motorguide trolling motors. Note that Minn Kota Maxxum and Terrova trolling motors require a Weedless Wedge 2 or 3 prop in order to use this Eliminator prop nut. This unit is finished in black and is designed and made in the U.S.A.

Specifications

• Brand: T-H Marine
• Manufacturer Part Number: GFEL-MKS-BK
• Color: Black
• Material: 6061 billet aluminum
• Finish: Anodized
• Weight: 0.31 pounds
• Tool Required for Installation: None

Fitment

• Fits most Minn Kota and Motorguide trolling motors
• Minn Kota Maxxum and Terrova trolling motors require a Weedless Wedge 2 or 3 prop to use this Eliminator

Frequently Asked Questions

What is the T-H Marine G-Force Eliminator Prop Nut used for? The GFEL-MKS-BK replaces the factory prop nut and washer on a trolling motor to reduce prop noise and vibration while improving heat dissipation around the prop shaft.

What trolling motors does the GFEL-MKS-BK fit? It is designed to fit most Minn Kota and Motorguide trolling motors. Minn Kota Maxxum and Terrova models require a Weedless Wedge 2 or 3 prop to use this Eliminator.

Do I need any tools to install this prop nut? No tools are needed to install the G-Force Eliminator; you simply remove the factory nut and washer (and the anode, if equipped) and thread the Eliminator on by hand.

Does the anode need to be removed before installing the Eliminator? Yes, if your trolling motor has an anode installed, it must be removed before you can install the GFEL-MKS-BK Eliminator prop nut.

What material is the Eliminator prop nut made from? It is machined from 6061 billet aluminum and finished with an anodized protective coating for corrosion resistance.

How much does the GFEL-MKS-BK weigh? The T-H Marine G-Force Eliminator Prop Nut weighs 0.31 pounds.

How does the Eliminator reduce prop noise and vibration? A durometer O-ring inside the nut dampens noise and vibration while also helping to secure the nut in place, and the wider contact area stabilizes the prop compared to a stock nut.

Does the Eliminator help keep the trolling motor cooler? Yes, built-in cooling ports on the GFEL-MKS-BK act as a heat sink, helping draw heat away to support longer battery and trolling motor life.

What color is this prop nut available in? The GFEL-MKS-BK is finished in black.

Do I need to replace the factory prop nut and washer to install this? Yes, the factory nut and washer must be removed before installing the T-H Marine G-Force Eliminator Prop Nut.

Can I use the Eliminator on a Minn Kota Terrova trolling motor? Yes, but Minn Kota Terrova (along with Maxxum) trolling motors require a Weedless Wedge 2 or 3 prop in order to use the GFEL-MKS-BK Eliminator.

Where is the G-Force Eliminator prop nut made? The T-H Marine G-Force Eliminator Prop Nut is designed and made in the U.S.A.