Tie Down Engineering 95045 Super Hooker Anchor #13, 740 lb Holding Power, Boats 24-30 ft
Tie Down Engineering 95045 Super Hooker Anchor #13, 740 lb Holding Power, Boats 24-30 ft
The Tie Down Engineering 95045 is a #13 Super Hooker fluke anchor built for boats in the 24 to 30 foot range. It is designed as a lightweight, easy-to-stow primary anchor that still delivers strong holding power in sand and mud bottoms typical of coastal and inland waterways.
The anchor is hot-dipped galvanized for corrosion resistance in fresh and salt water. Its wide, strong flukes are engineered to penetrate the bottom quickly and firmly, and the fully welded crown configuration sets the flukes at the correct angle for maximum holding power and secure penetration once set. Rated holding power for the 95045 is 740 pounds.
At 14.76 pounds, the 95045 is manageable for hand deployment and retrieval on boats without a windlass, while remaining substantial enough to hold a boat of its recommended length range in typical anchoring conditions. Overall anchor height is 28-1/4 inches, with a 21-1/2 inch stock width and a 14-1/4 inch fluke height.
This is the #13 model size in the Tie Down Engineering Super Hooker anchor lineup, positioned for boats from 24 feet up. Boaters with smaller craft should size down, and those with larger boats should size up within the Super Hooker line to match holding power to vessel length.
Specifications
- Brand: Tie Down Engineering
- Manufacturer Part Number: 95045
- Model Size: #13
- Holding Power: 740 pounds
- Recommended Boat Length: 24 to 30 feet
- Weight: 14.76 pounds
- Height: 28-1/4 inches
- Stock Width: 21-1/2 inches
- Fluke Height: 14-1/4 inches
- Material: Alloy steel
- Finish: Hot-dipped galvanized
- UPC: 081628950458
Frequently Asked Questions
What size boat is the Tie Down Engineering 95045 anchor recommended for? The 95045, model size #13, is recommended for boats from 24 to 30 feet in length.
How much holding power does the 95045 Super Hooker anchor provide? The 95045 is rated for 740 pounds of holding power.
How much does the 95045 anchor weigh? The Tie Down Engineering 95045 weighs 14.76 pounds.
What are the dimensions of the 95045 Super Hooker anchor? It measures 28-1/4 inches in height, with a 21-1/2 inch stock width and a 14-1/4 inch fluke height.
What material is the 95045 anchor made from? The 95045 is made from alloy steel with a hot-dipped galvanized finish for corrosion resistance in fresh and salt water.
Is the 95045 a fluke-style anchor? Yes, the 95045 Super Hooker is a fluke anchor with wide flukes designed to penetrate the bottom quickly and firmly.
How is the 95045 anchor's crown constructed? The 95045 uses a fully welded crown configuration that sets the flukes at the correct angle for secure penetration and maximum holding power.
What model size number is stamped on this anchor? This anchor is model size #13, part number 95045, within the Tie Down Engineering Super Hooker line.
Should I size up or down from the 95045 for a different boat length? Boats shorter than 24 feet should use a smaller Super Hooker model, while larger boats should move up to a bigger model size for adequate holding power; the 95045 is sized specifically for the 24 to 30 foot range.
Does the 95045 anchor include any accessories like chain or rope? The 95045 is the anchor itself; it does not include anchor rope or chain.
What finish protects the 95045 anchor from rust? A hot-dipped galvanized finish is applied to the 95045 to resist corrosion during marine use.