TRAC 3-Liter Fluid/Oil Change Pump - Self-Priming Hand-Held Extractor 69361

The TRAC 3-Liter Fluid/Oil Change Pump (69361) is a hand-actuated, tank-style extractor built for oil changes and the removal of fuel, coolant, and transmission fluid. It is designed for all types of motors, watercraft, and vehicles, and works well for pumping out bilge water and other trapped fluids. The self-priming pump creates a strong vacuum that draws in most non-corrosive liquids, giving you an easier and cleaner way to drain engines with hard-to-reach drain plugs.

The pump ships with a cap, adapters, and two hoses: a black extraction tube with a 0.34 inch (11/32 inch) outer diameter and 8 foot length for insertion into the dipstick tube, and a clear drain tube with a 0.50 inch (1/2 inch) inner diameter and 8 foot length for directing fluid into a container. A built-in clamp holds both tubes for tidy storage between uses, and the tank holds 3 liters (3.2 quarts) of extracted fluid. To use it, warm the engine briefly, insert the black tube into the dipstick tube, actuate the pump handle to build vacuum, and let it draw fluid until the tank is full or the vacuum releases. This pump is not intended for use with corrosive fluids such as acids.

Specifications

• Brand: TRAC
• Manufacturer Part Number: 69361
• Tank Volume: 3 Liters (3.2 Quarts)
• Dimensions: 9.3 x 1.5 x 20.5 inches
• Weight: 2.2375 pounds
• Black Extraction Tube Outer Diameter: 0.34 inches (11/32 inch)
• Black Extraction Tube Length: 8 feet
• Clear Drain Tube Inner Diameter: 0.50 inches (1/2 inch)
• Clear Drain Tube Length: 8 feet
• Power Source: Hand-powered
• Included Components: Cap, adapters, hoses
• UPC: 666996100638
• Manufacturer Warranty: 1 year

Fitment

Designed for all types of motors, watercraft, and vehicles; not limited to a specific make, model, or engine.

Replaces (OEM)

T10063

Frequently Asked Questions

What is the tank capacity of the TRAC 69361 fluid pump? The TRAC 3-Liter Fluid/Oil Change Pump (69361) holds 3 liters, which is 3.2 quarts, of extracted fluid before it needs to be emptied.

Does the 69361 pump fit my engine? The TRAC 69361 is designed for all types of motors, watercraft, and vehicles rather than one specific engine, since it draws fluid through the dipstick tube or another accessible opening rather than mounting to the engine itself.

Is T10063 the same part as 69361? Yes. T10063 is the older TRAC part number that the current 3-Liter Fluid/Oil Change Pump, 69361, replaces.

What fluids can this pump extract? The TRAC 3-Liter Fluid/Oil Change Pump can extract oil, fuel, coolant, transmission fluid, bilge water, and other trapped fluids, but it is not for use with corrosive fluids such as acids.

What are the dimensions of the 69361 pump? The TRAC 3-Liter Fluid/Oil Change Pump measures 9.3 x 1.5 x 20.5 inches and weighs 2.2375 pounds.

How long are the extraction and drain tubes? Both the black extraction tube and the clear drain tube on the TRAC 69361 pump measure 8 feet in length; the black tube has a 0.34 inch (11/32 inch) outer diameter and the clear tube has a 0.50 inch (1/2 inch) inner diameter.

How do I use the TRAC 3-Liter Fluid/Oil Change Pump? Run the engine briefly to warm the oil (never extract hot oil), remove the dipstick, insert the black tube into the dipstick tube, attach the coupler to the pump inlet, and actuate the handle for about 20 seconds at a time to build and maintain vacuum until the fluid is fully extracted.

What comes in the box with the 69361 pump? The TRAC 69361 ships with the pump, a cap, adapters, and two hoses (the black extraction tube and the clear drain tube).

Is this a self-priming pump? Yes, the TRAC 3-Liter Fluid/Oil Change Pump is self-priming, creating a vacuum on the tank that draws in fluid without needing to be manually primed first.

What is the difference between the 3-Liter and 7-Liter TRAC fluid pumps? The TRAC 3-Liter Fluid/Oil Pump (69361) holds 3 liters (3.2 quarts), while the TRAC 7-Liter Fluid/Oil Pump (69362) holds 7 liters (7.5 quarts); both use the same self-priming, tank-style, hand-actuated design and hose sizes, so the choice comes down to the amount of fluid you need to extract per session.

Can this pump be used for bilge water? Yes, the TRAC 3-Liter Fluid/Oil Change Pump can be used to pump out bilge water and other trapped fluids in addition to oil, fuel, coolant, and transmission fluid.

Is the TRAC 69361 genuine TRAC Outdoor Products equipment? Yes, the 3-Liter Fluid/Oil Change Pump, part number 69361, is manufactured by TRAC Outdoor Products and is backed by a 1 year manufacturer warranty.