Trac 69390 Macerator Pump - 13 GPM 12V Sanitation Waste Pump, Replaces T10069

The Trac 69390 Macerator Pump is built specifically for sanitation waste and fish box evacuations aboard your boat. This high-powered pump pairs a quality motor with a seamless motor tube and O-ring sealed motor end frames for durable, reliable operation. A 13 gallon per minute (49.2 liters per minute) flow rate empties a tank in minutes, while the high-speed rotary cutter shreds waste efficiently for higher discharge capacity.

The pump's internal housing design, premium impeller, and heavy-duty armature shaft seal are engineered to hold up to repeated use, and a manual turn key with a rear O-ring seal keeps the unit protected. The Trac 69390 is ignition protected and self-primes up to 5 feet, so it can be mounted away from the tank without losing suction. It runs on 12V DC power and uses a 1.5 inch intake hose. Note that the pump switch should be installed near the pump and tank so the operator can hear it running; when the tank runs empty the pump gets louder with a high pitch sound and should be shut off immediately, and it should never run dry for more than 15 to 20 seconds. The Trac 69390 replaces the older Trac part number T10069 and is backed by a 3 year warranty.

Specifications

• Brand: Trac
• Manufacturer Part Number: 69390
• Flow Rate: 13 gallons per minute (49.2 liters per minute)
• Self-Priming: Up to 5 feet
• Intake Hose Size: 1.5 inches
• Voltage: 12V DC
• Weight: 5.4 pounds
• Material: Plastic
• Color: Black
• Ignition Protection: Yes
• Warranty: 3 year manufacturer warranty
• UPC: 666996100690

Replaces (OEM)

• T10069

Frequently Asked Questions

What is the flow rate of the Trac 69390 Macerator Pump? The Trac 69390 delivers a 13 gallon per minute (49.2 liters per minute) flow rate, which is enough to empty a waste or fish box tank in minutes.

How far can the Trac 69390 self-prime? This macerator pump self-primes up to 5 feet, allowing it to be mounted away from the tank while still pulling suction.

Does the Trac 69390 replace an older Trac pump? Yes, part number 69390 replaces the older Trac part number T10069 and can be used as a direct replacement.

What size intake hose does the Trac 69390 use? The Trac 69390 Macerator Pump uses a 1.5 inch intake hose.

What voltage does the Trac 69390 Macerator Pump run on? It operates on 12V DC power.

What is the Trac 69390 Macerator Pump made of? The housing on the Trac 69390 is black plastic, paired with a seamless motor tube and O-ring sealed motor end frames.

Can the Trac 69390 be run dry? No, the Trac 69390 should never run dry for more than 15 to 20 seconds; when the tank empties the pump gets louder with a high pitch sound and should be shut off immediately, or the impeller and housing can be damaged.

Is the Trac 69390 Macerator Pump ignition protected? Yes, the Trac 69390 is ignition protected for safe onboard installation.

What warranty comes with the Trac 69390 Macerator Pump? The Trac 69390 is backed by a 3 year manufacturer warranty.

How much does the Trac 69390 Macerator Pump weigh? The Trac 69390 weighs 5.4 pounds.

What applications is the Trac 69390 designed for? It is designed specifically for sanitation waste and fish box evacuations on boats.

Where should the pump switch for the Trac 69390 be installed? The switch should be installed near both the pump and the tank so the operator can hear the pump running and know when the tank has emptied.