TRAC Automatic Bilge Pump, 800/1100 GPH, 3/4 Inch and 1-1/8 Inch Outlet, Model 69311

The TRAC 69311 Automatic Bilge Pump is a submersible, self-priming 12V centrifugal pump built for continuous duty in the bilge of any watercraft. It ships with both a 3/4 inch outlet rated at 800 GPH and a 1-1/8 inch outlet rated at 1100 GPH, and the pump body accepts either screw-on outlet so you can match the flow rate and hose size to your boat. Each outlet uses an O-ring seal, allowing the fitting to be rotated into position without stripping the threads. An integrated internal float switch gives the pump automatic ON/OFF operation as bilge water rises and falls, so it can be wired for hands-off use or paired with a 3-position AUTO/OFF/MANUAL panel switch.

The pump uses a cartridge-style head that separates from a universal strainer base, which is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps, and its screw mounting holes match Rule and Attwood Tsunami patterns, so it drops into existing mounting footprints for easy retrofitting. A side-mounting option on the strainer base also allows installation in tight bilge spaces. The pump is ignition protected, draws low power, and can run dry without damage. It meets ABYC, NMMA, U.S. Coast Guard, and ISO marine standards, and is covered by a 1 year manufacturer warranty. Recommended wiring uses 16 gauge marine-grade tinned wire with a 5 amp fuse installed in the positive lead near the battery.

Specifications

• Brand: TRAC
• Manufacturer Part Number: 69311
• Type: Bilge Pump
• Style: Automatic
• Flow Rate: 3/4 inch outlet - 800 GPH, 1-1/8 inch outlet - 1100 GPH
• Voltage: 12 Volts DC
• Fuse Rating: 5 Amp
• Amperage Draw: 3.7 Amps at 13.6 Volts DC
• Outlet Sizes: 3/4 inch and 1-1/8 inch, each with an O-ring seal
• Weight: 0.9 pounds
• Material: Plastic
• Color: Black
• UPC: 666996100126
• Ignition Protection: Yes
• Warranty: 1 Year

Fitment

This automatic bilge pump is designed for use in all watercraft and is not limited to a specific make, model, or engine. The universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps, and its screw mounting holes match Rule and Attwood Tsunami mounting patterns for straightforward retrofitting.

Frequently Asked Questions

What flow rate does the TRAC 69311 bilge pump provide? The TRAC 69311 provides 800 GPH through its 3/4 inch outlet or 1100 GPH through its 1-1/8 inch outlet, since the pump body ships with both outlet sizes included.

Does the 69311 turn on automatically when water enters the bilge? Yes. The TRAC 69311 has an internal integrated float switch that turns the pump ON and OFF automatically as bilge water rises and falls.

What outlet sizes come with this pump? Both a 3/4 inch screw-on outlet and a 1-1/8 inch screw-on outlet are included with the TRAC 69311, and each uses an O-ring seal so it can be rotated into position without stripping the threads.

Will this pump fit my existing bilge pump mounting base? The TRAC 69311's universal strainer base is connection-compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps, and its screw mounting holes match Rule and Attwood Tsunami mounting patterns.

What is the 69311 bilge pump made of? The TRAC 69311 is constructed of plastic and is finished in black.

How much does the TRAC 69311 weigh? The TRAC 69311 automatic bilge pump weighs 0.9 pounds.

Is the TRAC 69311 safe to run without water present? Yes, the TRAC 69311 can run dry without sustaining damage, which is a built-in feature of its cartridge-style pump head.

What fuse and wire gauge should I use when installing this pump? TRAC recommends a 5 amp fuse installed in the positive (brown) wire near the battery, using 16 gauge or heavier marine-grade tinned wire for the 69311's electrical connections.

Is the TRAC 69311 ignition protected? Yes, the TRAC 69311 automatic bilge pump is ignition protected and designed for a low power draw.

What marine standards does this bilge pump meet? The TRAC 69311 meets ABYC, NMMA, U.S. Coast Guard, and ISO marine standards.

What warranty comes with the TRAC 69311? TRAC backs the 69311 automatic bilge pump with a 1 year manufacturer warranty.

Can I install this pump in a tight space? Yes, the strainer base on the TRAC 69311 includes a side mounting option specifically for installation in tight bilge spaces.