TRAC Outdoors StrikeZone 25 AutoDeploy Anchor Winch, 25 lb Anchor Capacity, Replaces T10100

The TRAC Outdoors StrikeZone 25 AutoDeploy Anchor Winch is a compact 12-volt electric winch built to raise and lower mushroom or river anchors up to 25 pounds with the touch of a button. Its standout feature is AutoDeploy: press the button and the winch automatically pays out rope until it senses the anchor touch bottom, then locks the spool so you can start fishing right away. If conditions change, pressing any button on the switch stops deployment, and slack that becomes tight is automatically released until the boat holds. This makes it a strong fit for small fishing craft where quick, hands-free anchoring matters.

The winch ships with 100 feet of anchor rope rated to a 500 lb break strength, and it retrieves the full 100 feet in about 2 minutes. It uses just 7.5 inches by 7.5 inches of deck space, so it mounts easily on smaller boats without crowding the foredeck. A sealed marine-grade membrane switch keeps water out of the controls, and the winch is rated safe for use with a starting battery. Power protection comes from a 20-Amp automatic resetting circuit breaker, wired with 10 feet of 14-gauge marine-grade battery wire. The StrikeZone 25 replaces the earlier TRAC part number T10100 and is backed by a 2-year manufacturer's warranty. It is also compatible with the TRAC Gen 2 Anchor Winch AutoDeploy Second Switch Kit #69042 for boaters who want a second control point.

Specifications

• Brand: TRAC Outdoors
• Manufacturer Part Number: 69001
• Anchor Capacity: Up to 25 pounds (mushroom or river anchor)
• Voltage: 12V DC
• Deck Space Required: 7.5 inches x 7.5 inches
• Rope Included: 100 feet
• Rope Diameter: 5/32 inch
• Rope Break Strength: 500 pounds
• Rope Retrieval Speed: 100 feet in 2 minutes
• Battery Wire: 10 feet, 14-gauge
• Circuit Breaker: 20-Amp automatic resetting
• Switch Type: Sealed marine-grade membrane switch with AutoDeploy button
• Compatible Accessory: TRAC Gen 2 Anchor Winch AutoDeploy Second Switch Kit #69042
• Weight: 10 pounds
• Product Dimensions: 11.18 x 9.02 x 6.34 inches
• UPC: 666996101000
• Warranty: 2 years

Fitment

• Suitable for all boats where a 25 lb. Anchor and 100 ft. Of rope are sufficient, and ideal for small fishing craft.

Replaces (OEM)

• T10100

Frequently Asked Questions

What anchor weight can the TRAC StrikeZone 25 handle? Up to 25 pounds - the StrikeZone 25 is designed for mushroom and river anchors up to 25 lbs, making it well suited to small fishing craft.

How does AutoDeploy work on this winch? Pressing the AutoDeploy button on the TRAC StrikeZone 25 automatically lowers the anchor until it senses the rope go slack at the bottom, then locks the spool; you can stop deployment early by pressing any button on the switch.

How much rope is included? 100 feet of anchor rope rated to a 500 lb break strength ships with the TRAC StrikeZone 25 Anchor Winch.

How fast does it retrieve the anchor? The StrikeZone 25 retrieves the full 100 feet of rope in about 2 minutes.

How much deck space does the winch need? Just 7.5 inches by 7.5 inches of deck space, which makes the StrikeZone 25 a compact choice for small boats.

What does the TRAC StrikeZone 25 replace? It replaces the earlier TRAC part number T10100.

Can this winch run off the boat's starting battery? Yes, the TRAC StrikeZone 25 anchor winch is rated safe for use with a starting battery.

What electrical protection does it include? A 20-Amp automatic resetting circuit breaker and 10 feet of 14-gauge marine-grade battery wire come with the StrikeZone 25.

Is there a second switch or remote add-on available? Yes, the StrikeZone 25 is compatible with the TRAC Gen 2 Anchor Winch AutoDeploy Second Switch Kit #69042 for adding a second control point.

What is the warranty on this anchor winch? TRAC backs the StrikeZone 25 Anchor Winch with a 2-year manufacturer's warranty.

Is the anchor included with this winch? No, the anchor is not included with the TRAC StrikeZone 25 - the package covers the winch, rope, wiring, and circuit breaker.

How does the StrikeZone 25 differ from the TRAC AnchorZone 20? The AnchorZone 20 uses a manual power-up/power-down toggle switch and holds up to a 20 lb anchor, while the StrikeZone 25 adds an AutoDeploy button that senses the bottom and handles up to a 25 lb anchor.