Turning Point Express Mach3 Stainless Steel 3-Blade Propeller - Right-Hand, 14-1/4" Diameter, 19" to 21" Pitch

The Turning Point Express series delivers stainless steel strength and performance-tuned geometry for outboard and sterndrive boats that demand crisp hole shot, strong mid-range acceleration, and a top-end that holds up under load. Built from 15-5 stainless steel, these 3-blade propellers resist the corrosion, bending, and cupping loss that eventually degrade aluminum wheels, so the rake and cup profile engineered into the blades stays intact trip after trip. A higher rake angle adds bow lift for a drier, more stable ride, while the progressive cup sharpens bite in turns and reduces ventilation when trimmed out. Every Express propeller in this line shares the same 14-1/4 inch diameter and right-hand rotation, with the pitch chosen to match your engine's rated RPM range and the way you load and run your boat.

Specifications

• Brand: Turning Point Propellers
• Series: Express Mach3 / Express
• Diameter: 14-1/4 inches
• Number of Blades: 3
• Rotation: Right-hand (RH)
• Material: 15-5 stainless steel
• Weight: approximately 13 pounds

Sizes & Options

Both propellers in this line share the same 14-1/4 inch diameter and right-hand rotation; the difference is pitch. The 19 inch pitch (31501912, Express Mach3) suits boats that need quicker acceleration and better hole shot, or engines that are lugging below their rated RPM range at wide-open throttle. The 21 inch pitch (31502112, Express) is the better pick for lighter, faster boats or engines that are already running at or above their rated RPM range with a lower-pitch wheel, delivering a higher top speed once on plane. If you are unsure which pitch fits your setup, check your engine's rated WOT RPM range against a tachometer reading at full throttle and choose the pitch that brings you into that range.