Uflex PROTECH 3.1 Front Mount Outboard Hydraulic Steering Cylinder with UC128-OBF/3 Cylinder

The Uflex PROTECH 3.1 is a front mount outboard hydraulic steering cylinder built as part of the Protech front mount outboard steering package. It is supplied with the UC128-OBF/3 cylinder configuration, distinguishing it from the PROTECH 1.1 (UC128-OBF/1 cylinder) and PROTECH 2.1 (UC128-OBF/2 cylinder) in the same line. Engine type must be specified when ordering so the correct cylinder configuration is supplied.

Construction is focused on longevity and consistent performance under load. The helm shaft is stainless steel and is fitted with heavy duty shaft seals to resist leakage and wear over time. The piston is carbon steel, and the link assemblies are 304 stainless steel that has been electropolished and passivated for corrosion resistance. Hose routing is handled through adjustable boss style fittings, which allow the hose position to be set precisely without the risk of breaking a fitting from over-tightening during installation.

As a component of a packaged hydraulic steering system, the PROTECH 3.1 is intended to be completed with hydraulic oil (2 quarts) and, if needed, a hose kit with preassembled fittings available in a length specified at the time of ordering.

Specifications

• Brand: Uflex
• Manufacturer Part Number: PROTECH 3.1
• Product Type: Front Mount Outboard Hydraulic Steering Cylinder
• Cylinder Model: UC128-OBF/3
• Mounting Style: Front mount
• Helm Shaft Material: Stainless steel
• Piston Material: Carbon steel
• Link Assembly Material: 304 electropolished and passivated stainless steel
• Fittings: Adjustable boss style fittings
• Weight: 28.6 pounds
• UPC: 702755053057

Frequently Asked Questions

What is the Uflex PROTECH 3.1? The PROTECH 3.1 is a front mount outboard hydraulic steering cylinder from Uflex's Protech steering package, supplied with the UC128-OBF/3 cylinder configuration.

How is the PROTECH 3.1 different from the PROTECH 1.1 or 2.1? All three share the same Protech front mount outboard design, but the cylinder configuration differs: PROTECH 1.1 uses a UC128-OBF/1 cylinder, PROTECH 2.1 uses a UC128-OBF/2 cylinder, and PROTECH 3.1 uses a UC128-OBF/3 cylinder.

What materials is the PROTECH 3.1 made from? It has a stainless steel helm shaft, heavy duty shaft seals, a carbon steel piston, and link assemblies made from 304 stainless steel that is electropolished and passivated.

Do I need to specify anything when ordering the PROTECH 3.1? Yes, engine type must be specified when ordering the PROTECH 3.1 so the correct UC128-OBF/3 cylinder setup is matched to the application.

Does the PROTECH 3.1 include hydraulic oil? Hydraulic oil is offered separately in 2 quart quantities to fill the Protech steering system that the PROTECH 3.1 cylinder is part of.

Is a hose kit included with the PROTECH 3.1? A hose kit with preassembled fittings is available as an optional accessory for the Protech system, with the length specified at the time of ordering; it is not built into the PROTECH 3.1 cylinder itself.

How much does the PROTECH 3.1 weigh? The Uflex PROTECH 3.1 weighs 28.6 pounds.

What type of fittings does the PROTECH 3.1 use? It uses adjustable boss style fittings, which allow precise hose routing and reduce the risk of a fitting breaking from over-tightening during installation.

Is the PROTECH 3.1 designed for inboard or outboard applications? The PROTECH 3.1 is a front mount outboard cylinder, built specifically for outboard steering applications.

What is the UPC for the Uflex PROTECH 3.1? The Uflex PROTECH 3.1 front mount outboard steering cylinder carries UPC 702755053057.