Whitecap Industries 316 Stainless Steel 30 Degree Water Deck Fill, 1-1/2 Inch Hose, EPA Marked (6125AEPAC)

The Whitecap Industries 6125AEPAC is a 30 degree angled deck fill built from 316 stainless steel and marked WATER for filling a boat's fresh water tank from the deck. The 30 degree angle directs the fill spout so hoses and fill hardware clear the deck surface more easily than a straight fitting, which simplifies both installation and everyday use at the dock or fuel station. Construction is 316 stainless steel, a marine grade alloy chosen for its resistance to salt water corrosion and its ability to hold up to constant deck exposure, spray, and UV without pitting or rusting like lower grade steel.

The fitting is sized for 1-1/2 inch hose, connecting to the boat's fill hose to route water down to the tank. The cap is marked EPA, so the deck fill is clearly identified at a glance for the correct fluid, which helps prevent an accidental cross-fill into the wrong tank. This deck fill mounts through the deck and is a direct fit anywhere a 1-1/2 inch water fill opening is needed, making it a straightforward replacement for a worn, cracked, or corroded existing water deck fill. At 0.9 pounds, it is a compact, low profile deck hardware piece designed to sit flush and hold up to years of marine use.

Specifications

• Brand: Whitecap Industries
• Manufacturer Part Number: 6125AEPAC
• Material: 316 Stainless Steel
• Angle: 30 Degrees
• Hose Size: 1-1/2 Inch
• Fitting Type: WATER
• Cap Marking: EPA
• Weight: 0.9 pounds
• UPC: 725060612573
• Category: Gas Caps & Deck Fills

Frequently Asked Questions

What is the Whitecap Industries 6125AEPAC deck fill used for? It is a deck-mounted fitting marked WATER, used to fill a boat's fresh water tank through a deck-level opening rather than opening the tank directly.

What size hose does this deck fill take? The 6125AEPAC connects to 1-1/2 inch hose, matching it to the boat's existing water fill line.

Is the 6125AEPAC made of real stainless steel? Yes, it is built from 316 stainless steel, a marine grade alloy chosen for its resistance to salt water corrosion and long-term deck exposure.

Why is this deck fill angled at 30 degrees instead of straight? The 30 degree angle on the 6125AEPAC directs the hose connection away from the deck surface, making the hose easier to route and connect compared to a straight fitting.

How do I know this is the water fill and not the fuel fill? The cap on the Whitecap Industries 6125AEPAC is marked WATER with an EPA cap marking, so it is clearly identified to avoid cross-filling the wrong tank.

How much does this deck fill weigh? The 6125AEPAC weighs 0.9 pounds.

Can this deck fill replace an existing corroded or cracked water deck fill? Yes, the 6125AEPAC is designed as a deck fill with a 1-1/2 inch hose connection and can be installed in place of an existing water deck fill of matching size.

What does the EPA marking on the cap mean? The cap of the 6125AEPAC is stamped EPA, marking the fitting so it is clearly labeled at the deck.

Does the 316 stainless steel construction resist rust? 316 stainless steel, the material used in the 6125AEPAC, is a marine grade alloy specifically chosen to resist corrosion from salt water and constant weather exposure.

What category of marine hardware does the 6125AEPAC fall under? It is listed under Gas Caps and Deck Fills, the category covering deck-mounted fill fittings and caps for boats.