Whitecap Industries 316 Stainless Steel Vertical Push-Up Ski Tow and Pylon, 2-5/8 Inch

The Whitecap Industries Vertical Push-Up Ski Tow and Pylon (part number 6959) is a retractable, flush-mount tow point built from 316 stainless steel for long-term corrosion resistance in fresh or salt water. It is designed for ski and/or tube towing only, giving boat owners a dedicated attachment point for watersports without a permanently protruding tow bar or pylon cluttering the deck.

The tow pylon pushes up when in use and retracts flush with the deck when not needed, eliminating a tripping or snagging hazard and keeping the boat's lines clean. Once installed, the fitting rotates a full 360 degrees, letting the tow line swing freely as the boat turns or the rider changes direction, which reduces line wear and awkward pulling angles during towing.

This vertical version has an outer diameter of 2-5/8 inches, requires a 1-7/8 inch cut-out, and sits at a depth of 5-5/16 inches below the deck surface, so it is intended for installations with enough sub-deck clearance for that depth. The kit includes an aluminum backing plate, a stainless steel washer, and a nut, so no additional hardware is required to complete the installation. A horizontal version with different dimensions is offered separately under a different part number for boats where sub-deck depth is limited.

Specifications

• Brand: Whitecap Industries
• Manufacturer Part Number: 6959
• Type: Ski Tow & Pylon
• Material: 316 Stainless Steel
• Mounting Orientation: Vertical
• Size: 2-5/8 inches
• Outer Diameter: 2-5/8 inches
• Cut-Out Diameter: 1-7/8 inches
• Installation Depth: 5-5/16 inches
• Product Dimensions (L x W x H): 6 x 3 x 3 inches
• Rotation: 360 degrees
• Included Hardware: Aluminum backing plate, stainless steel washer, and nut
• Intended Use: Ski and/or tube towing only
• Weight: 2.25 pounds

Frequently Asked Questions

What is the Whitecap Industries 6959 ski tow and pylon used for? The 6959 is a retractable deck fitting intended for ski and/or tube towing only, giving the boat a dedicated flush-mount attachment point for towing water skiers or inflatable tubes.

Does the 6959 ski tow retract flush with the deck? Yes, the Whitecap Industries 6959 uses a flush deck design that eliminates a protruding ski-tow or pylon when the fitting is pushed down and not in use.

What is the outer diameter and cut-out size for part number 6959? Part number 6959 has an outer diameter of 2-5/8 inches and requires a deck cut-out of 1-7/8 inches.

How much sub-deck clearance does the 6959 pylon need? The installation depth of the 6959 is 5-5/16 inches, so the mounting location needs at least that much clearance below the deck surface.

Does the ski tow rotate once installed? Yes, the 6959 pylon rotates a full 360 degrees after installation, allowing the tow line to swing freely as the boat maneuvers.

What material is the Whitecap 6959 ski tow made from? It is made from 316 stainless steel, a marine grade alloy chosen for corrosion resistance in fresh and salt water.

What hardware is included with the 6959 ski tow and pylon? The kit includes an aluminum backing plate, a stainless steel washer, and a nut, so no additional hardware is needed to complete the installation.

How much does the 6959 ski tow weigh? The Whitecap Industries 6959 weighs 2.25 pounds.

Is this ski tow mounted vertically or horizontally? Part number 6959 is the vertical mount version, with a 2-5/8 inch outer diameter and 5-5/16 inch installation depth; a horizontal version with different dimensions is sold as a separate part number.

Can the 6959 pylon be used for wakeboard towing? The Whitecap Industries 6959 is designated for ski and/or tube towing only.

What deck thickness or profile is this tow point designed for? The 6959 is a flush, push-up style fitting designed to sit level with the deck when retracted, with a 1-7/8 inch cut-out and 5-5/16 inch depth needed for the mechanism.