Attwood 9067-1 Power Guard 27 Vented Battery Box for Group 27 Batteries, Black

The Attwood 9067-1 Power Guard 27 Battery Box is a vented, black polypropylene enclosure built to hold and protect a single Group 27 (Series 27) marine battery up to 10.5 inches in height. It is designed as a hold-down system that keeps a battery secured and ventilated while guarding against water intrusion and physical damage in an onboard battery compartment. The vented cover lets hazardous battery gases escape safely, while four cable openings, enlarged to.55 inch diameter, make routing battery cables straightforward without loosening the seal around the lid. Larger handles with rolled edges make the box easier to carry and position during installation, and reference instructions are molded directly into the inside of the cover for quick setup guidance without a separate manual. The box is constructed of acid-resistant polypropylene rated for impact performance from -20 F to +120 F, holding up to sun, cold, and the corrosive effects of battery acid in a marine environment. A 40 inch hold-down strap and mounting hardware are included, with the strap rated to resist 350 pounds of force, well above the U.S. Coast Guard minimum. The complete assembly meets ABYC Standard E-10 and USCG Specification 183.420 for battery hold-down systems. It suits fishing boats, pontoons, and other vessels running a single Group 27 battery and needing a compliant, corrosion-resistant box rather than an open tray or strap-only mount.

Specifications

• Brand: Attwood
• Manufacturer Part Number: 9067-1
• Battery Compatibility: Group/Series 27 batteries
• Maximum Battery Height: 10.5 inches
• Exterior Dimensions: 16.88 inches D x 9.63 inches W x 10.88 inches H
• Interior Dimensions: 13.06 x 6.9 x 10.5 inches
• Weight: 2.4 pounds
• Color: Black
• Material: Polypropylene
• Cable Openings: Four,.55 inch diameter
• Hold-Down Strap: 40 inch strap, rated to 350 pounds of force
• Compliance: ABYC E-10, USCG Specification 183.420
• Operating Temperature Range: -20 F to +120 F
• UPC: 022697906717
• Included Components: Power Guard 27 vented battery box, 40 inch mounting strap and hardware

Fitment

• Group/Series 27 marine batteries up to 10.5 inches in height

Frequently Asked Questions

What size battery fits the Attwood 9067-1 battery box? The 9067-1 is sized for a Group 27 (Series 27) marine battery with a maximum height of 10.5 inches; the interior measures 13.06 x 6.9 x 10.5 inches.

Is a mounting strap included with this battery box? Yes, the 9067-1 ships with a 40 inch hold-down strap and mounting hardware, with the strap rated to resist 350 pounds of force.

What is the 9067-1 battery box made of? It is made of acid-resistant polypropylene, impact-tested from -20 F to +120 F for durability in marine and outdoor conditions.

Does this battery box meet USCG and ABYC requirements? Yes, the Attwood 9067-1 complies with ABYC Standard E-10 and USCG Specification 183.420 for battery hold-down systems.

How much does the 9067-1 battery box weigh? The Power Guard 27 battery box weighs 2.4 pounds.

Is the box vented or fully sealed? The 9067-1 is a vented design, allowing hazardous battery gases to escape while the cover minimizes water intrusion.

How many cable openings does the box have and how big are they? The Attwood 9067-1 has four cable openings, enlarged to.55 inch diameter, for routing battery cables.

What color is the Power Guard 27 battery box? It is molded in black polypropylene.

Are installation instructions included? Reference instructions for the 9067-1 are molded directly into the inside of the cover, so they stay with the box rather than a separate paper insert.

What are the exterior dimensions of the 9067-1 battery box? The exterior of the box measures 16.88 inches D x 9.63 inches W x 10.88 inches H.

Will this box fit a taller battery than 10.5 inches? No, the 9067-1 is rated for batteries up to 10.5 inches maximum height; a taller battery will not close under the vented cover.

Does the battery box include handles for carrying? Yes, the Attwood 9067-1 has larger handles with rolled edges to make handling and installation easier.