Bennett BOLT2412 Electric Trim Tab Kit, 24 x 12 Inch, Part 6BT500135100, for Trailered Boats 25 to 31 Feet

The Bennett BOLT2412 Electric Trim Tab Kit is a 24 inch by 12 inch trim tab system built to improve boat ride quality, handling, and performance. It is designed for flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts, and is more suitable for single actuator use on trailered boats from 25 to 31 feet. Bennett trim tab sizes are listed in span x chord format, where span is the side-to-side measurement and chord is the fore-to-aft measurement -- this kit measures 24 inches wide (span) by 12 inches deep (chord).

The kit uses Bennett's BOLT technology, which routes wires through the upper hinge so none are exposed to the marine environment, adding protection and safety. A water-tight black nylon actuator provides trouble-free operation, and the main seal is placed high on the actuator to guard against marine growth and water intrusion failures common in older designs. The system also runs quieter than competing trim tab systems. Installation is fast because the actuator does not require disassembly, and the electric actuators carry a lifetime warranty. The kit includes two BEA2000 12-volt trim tab actuators and two stainless steel trim planes and mounting plates, along with 20 foot harnesses with waterproof connectors and 6 foot wire harnesses with waterproof connectors. A trim tab switch is sold separately.

Specifications

• Brand: Bennett
• Manufacturer Part Number: 6BT500135100
• Bennett Model Number: BOLT2412
• Yamaha Part Number: 6BT-50013-51-00
• UPC: 666285600061
• Type: Trim Tab Kit
• Style: Electric Trim Tabs
• Trim Tab Width (Span): 24 inches
• Trim Tab Depth (Chord): 12 inches
• Weight: 31 pounds
• Actuator Model: BEA2000
• Actuator Voltage: 12 volts
• Recommended Boat Length: 25 to 31 feet, trailered
• Harness Length: 20 feet, plus 6 feet wire harness
• Material: Stainless steel trim planes and mounting plates, black nylon actuator
• Warranty: Lifetime warranty for electric actuators
• Switch Included: No, sold separately

Fitment

• Flatboats, center console, dual console, deck boats, bowriders, bass boats, and runabouts
• Trailered boats 25 to 31 feet
• Single actuator use

Frequently Asked Questions

What is the Bennett BOLT2412 trim tab kit designed for? The Bennett BOLT2412 Electric Trim Tab Kit is designed to improve boat ride quality, handling, and performance, and is well suited for flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts, recommended for trailered boats from 25 to 31 feet.

What size are the trim tabs in the BOLT2412 kit? This kit measures 24 inches wide (span) by 12 inches deep (chord). Bennett sizes its trim tabs in span x chord format, where span is the side-to-side measurement and chord is the fore-to-aft measurement.

What is included with the Bennett BOLT2412 trim tab kit, part 6BT500135100? This kit includes two BEA2000 12-volt trim tab actuators, two stainless steel trim planes and mounting plates, two 20 foot harnesses with waterproof connectors, and 6 foot wire harnesses with waterproof connectors.

Is a trim tab switch included with this kit? No. The Bennett BOLT2412 trim tab kit is sold without a switch, and the switch must be purchased separately.

What actuators power the BOLT2412 system? Two BEA2000 12-volt trim tab actuators drive the trim planes in this Bennett BOLT2412 kit.

How long are the wiring harnesses on the BOLT2412 kit? Each actuator comes with a 20 foot harness with waterproof connectors, plus a 6 foot wire harness with a waterproof connector.

What are the trim planes made of on this Bennett kit? Stainless steel trim planes and mounting plates are used on the Bennett BOLT2412, part 6BT500135100.

How does the BOLT2412 protect against water intrusion? Wires are threaded through the upper hinge so none are exposed to the marine environment, the actuator itself is a water-tight black nylon design, and the main seal is placed high on the unit to guard against marine growth and water intrusion failures.

Can two actuators on the same tab be synchronized? No. The Bennett BOLT2412 system is more suitable for single actuator use, since two electric actuators on the same tab cannot be synchronized.

What warranty comes with the Bennett BOLT2412 kit? The electric actuators in the Bennett BOLT2412 kit, part 6BT500135100, carry a lifetime warranty.

How much does the Bennett BOLT2412 trim tab kit weigh? The Bennett BOLT2412 Electric Trim Tab Kit weighs 31 pounds.

What boat sizes is the BOLT2412 recommended for? Bennett recommends the BOLT2412 for trailered boats between 25 and 31 feet, including flatboats, center consoles, dual consoles, deck boats, bowriders, bass boats, and runabouts.