Bennett ES2000A Euro Style Trim Tab Rocker Switch - Second Station Bridge Control with 20 ft Wire Harness

The Bennett ES2000A Euro Style Trim Tab Rocker Switch is a second-station bridge control designed for boats with a helm on an upper deck or bridge, letting a second operator adjust hydraulic trim tabs from that station. It ships with a 20 foot wire harness so it can be run from the bridge back to the boat's existing Bennett trim tab wiring, and it installs into any existing Bennett 2 1/2-inch rocker switch hole for a straightforward retrofit or upgrade.

The switch has an ergonomic, low-profile Euro-style rocker design that gives a positive, tactile click each time the trim tabs are engaged, so the operator gets clear physical feedback without needing to watch the tabs. A built-in lock-out feature prevents the operator from pressing the switch in opposite directions at the same time, protecting the hydraulic actuators from conflicting commands. The rocker body is water resistant, holding up to spray and wet conditions typical of a bridge or open helm station, and it is finished in a beige color to blend with common helm panel finishes.

Construction is plastic with nickel contacts and quick-connect terminals for a clean wiring installation, and the switch operates on a normally-open, 1-way circuit with a single rocker position. Because it fits the standard Bennett rocker switch cutout, it works alongside existing Bennett hydraulic trim tab systems without requiring a new panel hole.

Specifications

• Brand: Bennett
• Manufacturer Part Number: ES2000A
• Type: Trim Tab Switch
• UPC: 666285317150
• Wire Harness Length: 20 feet
• Switch Hole Size: 2 1/2 inches
• Operation Mode: Hydraulic
• Contact Type: Normally Open
• Circuit Type: 1-way
• Number of Positions: 1
• Material: Plastic
• Contact Material: Nickel
• Terminal Type: Quick-connect
• Color: Beige
• Actuator Type: Rocker
• Mounting Type: Panel Mount
• Ingress Protection Rating: IP54
• Item Dimensions (L x W x H): 14 x 14 x 3 inches
• Weight: 1.75 pounds

Fitment

• Fits any existing Bennett 2 1/2-inch rocker switch hole
• Wired for use as a second (bridge) station alongside an existing Bennett hydraulic trim tab control

Frequently Asked Questions

What is the Bennett ES2000A rocker switch used for? The Bennett ES2000A is a second-station (bridge) rocker switch for controlling hydraulic trim tabs from an upper helm or bridge station, separate from the boat's main lower-station control.

Does the ES2000A come with a wire harness? Yes, the ES2000A includes a 20 foot wire harness so it can be run from a bridge or second station back to the boat's existing Bennett trim tab wiring.

What size switch hole does the ES2000A fit? This switch fits into any existing Bennett 2 1/2-inch rocker switch hole, so it drops into the standard Bennett cutout without needing a different-sized opening.

Is the ES2000A waterproof? The ES2000A rocker switch has a water resistant design suited to exposed bridge and helm locations, carrying an IP54 ingress protection rating.

What is the difference between the ES2000 and the ES2000A? The ES2000 is the standard Euro Style trim tab rocker switch for a single (primary) station, while the ES2000A is the second-station version built for bridge applications and supplied with a 20 foot wire harness.

What material is the ES2000A switch made of? The Bennett ES2000A rocker switch body is made of plastic, with nickel switch contacts and quick-connect terminals for wiring.

Does the ES2000A have a lock-out feature? Yes, the ES2000A has a lock-out feature that prevents the operator from pressing the rocker in opposite directions at the same time, protecting the trim tab actuators from conflicting signals.

How does the ES2000A give feedback when trim tabs are engaged? The ES2000A provides a positive audible and tactile click each time the trim tabs are engaged, so the operator knows the switch input has registered.

What color is the Bennett ES2000A switch? The Bennett ES2000A rocker switch is finished in beige.

How much does the ES2000A rocker switch weigh? The Bennett ES2000A weighs 1.75 pounds as supplied with its 20 foot wire harness.

Is the ES2000A easy to install? Yes, the ES2000A is designed for easy installation into an existing Bennett 2 1/2-inch rocker switch hole using its included 20 foot wire harness and quick-connect terminals.

What type of circuit does the ES2000A use? The ES2000A operates on a normally-open, 1-way circuit with a single rocker position.