Blue Sea Systems CableClam Cable Feed-Thru, 0.83 Inch Opening, Part Number 1002

The Blue Sea Systems CableClam, part number 1002, is a waterproof deck fitting designed to route coaxial cable through a bulkhead or deck while sealing out water intrusion. It is built for feeding antenna cable, such as VHF or satellite antenna coax, from an exterior mount down into the vessel's interior without drilling a hole large enough to compromise the deck's watertight integrity. The clamp-style body closes around the cable after it has been run, so the cable does not need a connector removed to pass it through, and the fitting seals around the cable jacket once tightened.

The CableClam features a ring made from UV-stabilized thermoplastic for long-term exposure to sun and weather, paired with a UV-stabilized Buna-N rubber seal that grips the cable and blocks moisture. The housing is finished in black nylon. This is the base 1002 configuration with a 0.83 inch opening sized for standard antenna coax; a separate part number, 1002100, is the same fitting supplied with an added 316 stainless steel dress cap for buyers who want the mounting hardware concealed to match other deck hardware.

Specifications

• Brand: Blue Sea Systems
• Manufacturer Part Number: 1002
• Opening Diameter: 0.83 inch
• Connector Type: Nema Type B
• Cable Type: Coaxial
• Ring Material: UV-Stabilized Thermoplastic
• Seal Material: UV-Stabilized Buna-N Rubber
• Outer Material: Nylon
• Color: Black
• Special Feature: Waterproof
• Weight: 0.2 pounds
• UPC: 632085010027

Frequently Asked Questions

What size cable opening does the Blue Sea Systems CableClam 1002 have? The CableClam part number 1002 has a 0.83 inch opening, sized to pass standard antenna coaxial cable through a deck or bulkhead.

What is a CableClam used for? It is a waterproof feed-thru fitting that lets you route a cable, such as VHF or satellite antenna coax, through a boat's deck or bulkhead while sealing out water at the entry point.

Does the cable need a connector removed to install the CableClam? No. The CableClam 1002 is a clamp-style fitting that closes around the cable after it has already been run, so the cable and its connector do not need to be disassembled during installation.

Is the Blue Sea Systems CableClam waterproof? Yes, the CableClam 1002 is a waterproof fitting, using a UV-stabilized Buna-N rubber seal that grips the cable jacket to keep water out.

What materials is the CableClam 1002 made from? The ring is UV-stabilized thermoplastic, the seal is UV-stabilized Buna-N rubber, and the outer housing is black nylon.

What color is the Blue Sea Systems CableClam 1002? The CableClam 1002 is black.

How much does the CableClam 1002 weigh? The Blue Sea Systems CableClam, part number 1002, weighs 0.2 pounds.

What is the difference between the CableClam 1002 and 1002100? Part number 1002 is the standard CableClam fitting, while part number 1002100 is the same fitting supplied with an added 316 stainless steel dress cap that conceals the mounting hardware and matches other deck hardware; they are separate SKUs.

What type of cable is the CableClam 1002 compatible with? It is designed for coaxial cable, such as the coax used for VHF and satellite antenna runs, connecting through a Nema Type B fitting.

What is the UPC for the Blue Sea Systems CableClam 1002? The UPC for the CableClam 1002 is 632085010027.